Join Date: Jan 2010
Location: Fountain Valley California
I see there are a series of lighting holes on the bottom of each of the 2 front frame rails. So I suppose if you really have no choice, you could have them try to attach a pull cable and hook into one of those holes. But of course that would have to be *if the front end is up a fair amount* to gain access to them, to try for a very slow pull out.
If it has to be a rear pull out, it only looks like a hook/cable around either the left or right lower rear wheel strut link (as near to the cross member as possible) is available. I've never been up on a rack to study for the best possibilities.
Either way, it just looks and feels like some type of superficial damage will take place, no matter how you have it done.
Added info--- Just saw a commercial of a car being towed out of a ditch from the rear. In this case, they showed cable chains looped through the rear wheel spokes, as a pull out location. So I guess that way is possible also.
Last edited by GOPHERIT; 01-14-2013 at 05:48 PM.
Reason: added info