PB: Stock Stall NA Breaks into the 11's!!!!!! - Page 4 - Pontiac G8 Forum: G8 Forums - G8Board.com
Reply
 
LinkBack Thread Tools
post #61 of 97 (permalink) Old 01-06-2013, 04:30 PM Thread Starter
Super Moderator
 
Troy Trackbeast's Avatar
 
Join Date: Oct 2011
Location: Fuquay Varina, NC
Posts: 3,216
Garage
One of these days I want to be able to run with this V....


Not sure about this one...

Troy Trackbeast is offline  
Sponsored Links
Advertisement
 
post #62 of 97 (permalink) Old 01-06-2013, 04:54 PM
Sarcasm Personified
 
Join Date: Aug 2008
Location: Cary, NC
Posts: 3,797
If you search Fayetteville for 1/5/13 you should find vids of the CTS-V upclose.


2015 Mustang GT Auto, 3.55, recaro seats, spoiler delete,GT350 intake manifold, Lund tune, Roush CAI, Solo catback, SVE Drift 19x9.5 w/ 275/40/19's. 426rwhp.
2015 Jeep Cherokee Latitude V6
Zodiac is offline  
post #63 of 97 (permalink) Old 01-06-2013, 07:17 PM
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 544
Quote:
Originally Posted by bluegoat06 View Post
What did you use to replace the spectre?

Sent from my Nexus S4G | 4.1.1 AOSP JellyButt v2.4
I added a 90 elbow to put a bigger filter on the car and closer to the cooler air....well that really hurt me at the track and couldn't best a 11.7. I switch back to the stock spectre filter and it dropped to 11.6s, 11.5s, then 11.4s. Crazy how adding a extra piece hurt so bad. thats why me and Troy were so close on our first run cause of that damn thing lol.

D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
post #64 of 97 (permalink) Old 01-06-2013, 07:19 PM
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 544



ill just add this here lol

D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
post #65 of 97 (permalink) Old 01-06-2013, 07:49 PM Thread Starter
Super Moderator
 
Troy Trackbeast's Avatar
 
Join Date: Oct 2011
Location: Fuquay Varina, NC
Posts: 3,216
Garage
That thing runs strong! Ready to see how it does with boost


Sent from my iPhone using AutoGuide.com App
Troy Trackbeast is offline  
post #66 of 97 (permalink) Old 01-06-2013, 07:52 PM
Sarcasm Personified
 
Join Date: Aug 2008
Location: Cary, NC
Posts: 3,797
Damn nice, that s10 was impressive as well though. Hey you got vids of our run?

Edit nevermind I found it!


2015 Mustang GT Auto, 3.55, recaro seats, spoiler delete,GT350 intake manifold, Lund tune, Roush CAI, Solo catback, SVE Drift 19x9.5 w/ 275/40/19's. 426rwhp.
2015 Jeep Cherokee Latitude V6
Zodiac is offline  
post #67 of 97 (permalink) Old 01-06-2013, 09:47 PM
Advanced Member
 
G8-4-Speed's Avatar
 
Join Date: Jan 2009
Location: Hope Mills, NC
Posts: 1,202
Quote:
Originally Posted by dctg8 View Post
I added a 90 elbow to put a bigger filter on the car and closer to the cooler air....well that really hurt me at the track and couldn't best a 11.7. I switch back to the stock spectre filter and it dropped to 11.6s, 11.5s, then 11.4s. Crazy how adding a extra piece hurt so bad. thats why me and Troy were so close on our first run cause of that damn thing lol.

I would have never of guessed...... that Spectre is the smallest filter I have seen for an aftermarket G8 filter.

Sucks I was out of town and couldn't be at the track....Hopefully we'll get some more weekends with good air.

2009 G8 GT- Rick Crawford
1.50 60ft, 10.41 @ 131.4 Comp 234/243 111+0 6.4 N/A
1.53 60ft, 10.59@ 129.7 ALL MOTOR!!! N/A G8 Record Holder
G8-4-Speed is offline  
post #68 of 97 (permalink) Old 01-06-2013, 11:12 PM
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 544
Quote:
Originally Posted by G8-4-Speed View Post
I would have never of guessed...... that Spectre is the smallest filter I have seen for an aftermarket G8 filter.

Sucks I was out of town and couldn't be at the track....Hopefully we'll get some more weekends with good air.
It stumped me too. I'm going to look for a bigger filter to sit in it's place instead of elbow and the huge filter. Wonder if that hurts Doug aswell.

D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
post #69 of 97 (permalink) Old 01-07-2013, 12:22 AM
Senior Member
 
Join Date: Sep 2008
Location: Apex, NC
Posts: 1,420
Great pass Dustin!

2009 Hot White G8 GT, CTS-V v1 fronts, Camaro 20's, BMR Sways, Eibach Springs, Rear Cradle bushings. GXP FE3's, BMR rear susp. Kooks 1 7/8 LT headers, RCR custom 3 exhaust, ported LSA blower, 2.38 pulley; Ported heads and TB; LS7 MAF, Racetec pistons, Scat rods, CTS-V crank; FAST 85 injectors; RCR Lunati cam: 219/237 .612/.601, 114 +2 LSA. CTS-V pump/VaporWorx cntlr. Built trans, Methanol injection. Rick Crawford built and tuned. Best 1/4 9.68 @142, 1.42 60'.
DougHG8 is offline  
post #70 of 97 (permalink) Old 01-07-2013, 01:44 AM
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 544
Quote:
Originally Posted by DougHG8 View Post
Great pass Dustin!
Thanks Doug!!!

D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
post #71 of 97 (permalink) Old 01-08-2013, 12:47 AM
HPT Pro Tuner
 
bluegoat06's Avatar
 
Join Date: Mar 2008
Location: Rancho Santa Margarita, CA
Posts: 3,815
Quote:
Originally Posted by dctg8 View Post
I added a 90 elbow to put a bigger filter on the car and closer to the cooler air....well that really hurt me at the track and couldn't best a 11.7. I switch back to the stock spectre filter and it dropped to 11.6s, 11.5s, then 11.4s. Crazy how adding a extra piece hurt so bad. thats why me and Troy were so close on our first run cause of that damn thing lol.
That's interesting, do you have a pic with that setup (the one that didn't work) ?

2012 Mustang GT, M6, 3.73's, Base/Brembo Package
3" H Pipe/Stock cats, Res!/3" pipes, Magnaflow 14419's AB, UPR Catch Can
HPTuners Pro v2.25 | Street Tuned

2010 Silverado 1500 LT Crew 5.3L
Magnaflow 14619, K&N Drop Filter, Airraid MIT, UPR Catch Can, American Outlaw Deputy 17x9, BFG 285/70/17 TKO, Bilstein 5100's
Hptuners 2.24 Pro / Street Tuned
bluegoat06 is offline  
post #72 of 97 (permalink) Old 01-08-2013, 02:49 PM
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 544
Quote:
Originally Posted by bluegoat06 View Post
That's interesting, do you have a pic with that setup (the one that didn't work) ?
yeah, ill post it up.

D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
post #73 of 97 (permalink) Old 01-08-2013, 02:54 PM
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 544



D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
post #74 of 97 (permalink) Old 01-08-2013, 03:11 PM
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 544
Quote:
Originally Posted by DRUMSBH View Post
Nice times Troy. Unfortunately I won't get gto fronts since I have brembos in the wings to go on but I'm hoping to get into 11s with just drags this time.

Sent from my EVO using AutoGuide App
What about bolt-on hub spacers, like the 19mm ones I have in the rear?

D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
post #75 of 97 (permalink) Old 01-12-2013, 10:43 PM
Senior Member
 
MotorCityG8's Avatar
 
Join Date: May 2011
Location: Fraser, MI
Posts: 996
I need to get on your guys level. Got my stall now just deciding on the new cam and figuring out a drag wheel set up.

Congrats on the PB Troy

13' Ford Focus ST2

2008 G8 GT PBM / No Roof - SOLD

Go: Livernois Stage 1 Cam / Circle D 3000 Stall / Ported TB & Intake / Roto-Fab CAI / Pat G Tune / SLP Powerflow Axlebacks / OBX 1 7/8 LT w/3in midpipe / LS7 MAF

Show: Avant Garde M310 / Eibach & Fe3 set up / Plasti Dipped Wheel and Kidney grills / Debadged / Tint (20% windshield, 5% sides, 20% on top of 5% on the rear) / Bathurst Stripes.
MotorCityG8 is offline  
post #76 of 97 (permalink) Old 01-13-2013, 12:33 AM
'Mod'erator
 
The Yeti's Avatar
 
Join Date: May 2009
Location: East Bay, Ca
Posts: 4,823
Aight Troy I am hitting the track tomorrow to see what it do!

DA should be in the Negatives and I have some brand new street tires. I don't think I will run anything below 12.05 but we will see how close I can come with the 20in rims on. My stall was delivered the other day so this may be my last stock stall run. I'm racing at a track that I historically run pretty slow on due to head winds, but maybe the track gods will be on my side...


Pat G Tune & DOD cam, RCR Intake & TB, 4IN MAF
Ported stock Heads, 2600 Stall, VCM, OBX, UDP
H&Rs, Konis, BMR, Brembos, Slotted/Drilled Rotors
3.27 Gears, ZL1 pump, LSA awaiting install

Bolt ons Street tires
12.649@107.817 60ft 1.96 Da 700ft

Heads/Cam pre stall Street tires
12.16@114.2 60ft 1.75 Da -200

After Stall
11.82@115.9 60ft 1.66 DA 400ft

Zex 125shot
11.48@124 60ft 1.83 DA 2000ft
second gear pull
The Yeti is offline  
post #77 of 97 (permalink) Old 01-13-2013, 06:49 AM Thread Starter
Super Moderator
 
Troy Trackbeast's Avatar
 
Join Date: Oct 2011
Location: Fuquay Varina, NC
Posts: 3,216
Garage
Quote:
Originally Posted by The Yeti View Post
Aight Troy I am hitting the track tomorrow to see what it do!

DA should be in the Negatives and I have some brand new street tires. I don't think I will run anything below 12.05 but we will see how close I can come with the 20in rims on. My stall was delivered the other day so this may be my last stock stall run. I'm racing at a track that I historically run pretty slow on due to head winds, but maybe the track gods will be on my side...
Right on, keep us updated!

Which stall did you go with? Tranny cooler and deeper pan as well?

I've been eyeing a circle d triple disk 2600...


Sent from my iPhone using AutoGuide.com App
Troy Trackbeast is offline  
post #78 of 97 (permalink) Old 01-13-2013, 08:06 AM
Sarcasm Personified
 
Join Date: Aug 2008
Location: Cary, NC
Posts: 3,797
Quote:
Originally Posted by The Yeti View Post
Aight Troy I am hitting the track tomorrow to see what it do!

DA should be in the Negatives and I have some brand new street tires. I don't think I will run anything below 12.05 but we will see how close I can come with the 20in rims on. My stall was delivered the other day so this may be my last stock stall run. I'm racing at a track that I historically run pretty slow on due to head winds, but maybe the track gods will be on my side...
Good luck, can't wait to see your results.


2015 Mustang GT Auto, 3.55, recaro seats, spoiler delete,GT350 intake manifold, Lund tune, Roush CAI, Solo catback, SVE Drift 19x9.5 w/ 275/40/19's. 426rwhp.
2015 Jeep Cherokee Latitude V6
Zodiac is offline  
post #79 of 97 (permalink) Old 01-13-2013, 07:04 PM
'Mod'erator
 
The Yeti's Avatar
 
Join Date: May 2009
Location: East Bay, Ca
Posts: 4,823
Quote:
Originally Posted by Troy Trackbeast View Post
Right on, keep us updated!

Which stall did you go with? Tranny cooler and deeper pan as well?

I've been eyeing a circle d triple disk 2600...


Sent from my iPhone using AutoGuide.com App
Thanks man. I'll post in another thread my runs but I did get another PB Just not an 11sec slip.

I went with a single disk 2600 258mm circle d stall. Considering today all of my 60fts were 1.87-1.90 on street tires I don't think I need much of a stall to get great 60s...

I am having a cooler installed but I'm skipping the deeper pan as I don't think I need it right now.

Quote:
Originally Posted by Zodiac View Post
Good luck, can't wait to see your results.
Thanks man. I'll post up my own thread shortly. All of us NA stock stall G8's are still looking up at troy. He set the bar really high!!!


Pat G Tune & DOD cam, RCR Intake & TB, 4IN MAF
Ported stock Heads, 2600 Stall, VCM, OBX, UDP
H&Rs, Konis, BMR, Brembos, Slotted/Drilled Rotors
3.27 Gears, ZL1 pump, LSA awaiting install

Bolt ons Street tires
12.649@107.817 60ft 1.96 Da 700ft

Heads/Cam pre stall Street tires
12.16@114.2 60ft 1.75 Da -200

After Stall
11.82@115.9 60ft 1.66 DA 400ft

Zex 125shot
11.48@124 60ft 1.83 DA 2000ft
second gear pull
The Yeti is offline  
post #80 of 97 (permalink) Old 01-13-2013, 07:45 PM Thread Starter
Super Moderator
 
Troy Trackbeast's Avatar
 
Join Date: Oct 2011
Location: Fuquay Varina, NC
Posts: 3,216
Garage
Quote:
Originally Posted by The Yeti View Post
Thanks man. I'll post in another thread my runs but I did get another PB Just not an 11sec slip.

I went with a single disk 2600 258mm circle d stall. Considering today all of my 60fts were 1.87-1.90 on street tires I don't think I need much of a stall to get great 60s...

I am having a cooler installed but I'm skipping the deeper pan as I don't think I need it right now.



Thanks man. I'll post up my own thread shortly. All of us NA stock stall G8's are still looking up at troy. He set the bar really high!!!
If you heat treat those street ties with hot lap you could probably get a nasty 60' once you add the stall.
Troy Trackbeast is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Pontiac G8 Forum: G8 Forums - G8Board.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome