So after seeing all the home made ones, and trying my own with spectre and FAILING. I saw a picture... And well i bought this intake from a GTO. Looks Great, And i believe serves the same purpose of a yella tube or such. Used The stock airbox with a K&N filter.

Please voice your opinions.

Not bad IMO. Cost me $30. Looks better than tubes and PVC and all. I just dont have big bucks to spend on minimal gains right now.

Only extra item you need is a hose for the breather. Get a bigger one than the one pictured. I had to hollow it out because it was too skinny for the actual intake tube.
http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0633.jpg

http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0621.jpg

http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0622.jpg

http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0623.jpg

http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0624.jpg

http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0625.jpg

http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0626.jpg

http://i133.photobucket.com/albums/q44/JeepEaterH3/IMG_0627.jpg

looks good.

Much better than a Home Depot intake! ;) Good job, man. :)

Much better than a Home Depot intake! ;) Good job, man. :)

He had a good idea. But I didnt like the look.

Looks clean, can you tell any difference?(sound/hp)

It did feel a bit more responsive. I only drove for 10 minutes though. I'll repost tomorrow after a LNG drive. It does sound less restrictive for sure.

Man sometimes I hate using the iPhone to respond LOL spells things weird!

Hmm, gives me an idea. I still have the K&N intake that I took off of my GTO.

well it wrks lol im jus waiting till i get my car in for the knock in the front end parts should be in by monday

It runs real good with this intake. Feels more responsive.

Wasn't it a little hard to connect to the engine intake?
The angle is a little off so I added a 3 in extension from the intake so it's no bent so much.

For a stock look, I ordered a GTO vacuum connection for $10.
I'll let you know if hooks up directly to the manifold.

Wasn't it a little hard to connect to the engine intake?
The angle is a little off so I added a 3 in extension from the intake so it's no bent so much.

For a stock look, I ordered a GTO vacuum connection for $10.
I'll let you know if hooks up directly to the manifold.


it was. Later ill figure how to get a more natural bend. How did you extend yours?

Pics?

Though the bend at the MAF is a little tight, it seems to work but only if using the stock filter box. I don't think you could get away with it using an after market cone type filter.
AIRAID makes a UBI (U-Build It) kit. You can either buy the 4" tube alone for less than $100 or the whole kit (couplers, clamps, filter, tube).
You just have to cut the tube as needed.

Tube only:

http://i291.photobucket.com/albums/ll307/AIRAIDFilterCompany/UBItubeonly-1.jpg?t=1244291049

Whole Kit:

http://www.clearlakeautomotive.com/clipart/UBI.jpg

got the GTO intake on my car as well.. got it for free from a GTO friend....


just had to force it down, and get a custom hose..

Feels more responsive.

I got one from Ebay, looks brand new and he also sent the breather line. Got it set up, I did an extenstion to off set the angle. Much better response and better looking...

got the GTO intake on my car as well.. got it for free from a GTO friend....


just had to force it down, and get a custom hose..

Feels more responsive.

I got one from Ebay, looks brand new and he also sent the breather line. Got it set up, I did an extenstion to off set the angle. Much better response and better looking...

Hey more ILLINOIS peeps here....Wsup!!

I got one from Ebay, looks brand new and he also sent the breather line. Got it set up, I did an extenstion to off set the angle. Much better response and better looking...
how are you extending? pics please?

Now I am wondering if that shaker off the GTO will fit our cars , anybody know ? ,,, where can I get one , might just try it.

it was. Later ill figure how to get a more natural bend. How did you extend yours?

Pics?

I bought a 4" etension from PEP Boys and cut 1 1/2" off.
Then I bought a GTO breather line.
See pics.

Though the bend at the MAF is a little tight, it seems to work but only if using the stock filter box. I don't think you could get away with it using an after market cone type filter.
AIRAID makes a UBI (U-Build It) kit. You can either buy the 4" tube alone for less than $100 or the whole kit (couplers, clamps, filter, tube).
You just have to cut the tube as needed.

Tube only:

http://i291.photobucket.com/albums/ll307/AIRAIDFilterCompany/UBItubeonly-1.jpg?t=1244291049

Whole Kit:

http://www.clearlakeautomotive.com/clipart/UBI.jpg

Any link to where this kit can be had?

it's pretty expensive, like $200. Go on ebay and search for "aluminum mandrel kit" it will pull up a kit similar to this with mandrel bent tubes, connectors, etc for like $60-80 then just buy a filter. I plan to do this...

Any link to where this kit can be had? Sorry bruh..I can't post links to unauthorized sponsors on this board. Just do a google search and click the shopping link. From there you can filter by price from lowest to highest. I found the cheapest (tube only) price at around $83.

I like the GTO tube. Especially as it has the flex zones. It seems the Yella tube is more stiff? I don't know if it s a problem for this car, but it seemed to be in the 3.8 V6's

I know this is an ancient thread, but I just bought a GTO intake tube from someone on a GTO forum. Anxious to get this installed!

I think I might still have that tube laying around in a box from when I had my GTO. I will have to check tonight. I don't need it because I have the Rotofab, but somebody else might.

I kinda like this mod! Gonna check my price on one tomorrow. Seems like it has to help somewhat? The stock airbox silencer is a joke!

I do have one if anyone is interested. Make me an offer.

I have one laying around in the garage also if someone needs one.

$20 Camero tube, $10 spray on bed liner, $10 for fiberglass and hose. $10 for 4" silicone adapter for MAF. I already had the hose, fiberglass and adapter laying around.
http://i92.photobucket.com/albums/l32/ovrebo1/100MEDIAIMAG0782.jpg