JBA needs a Pontiac G8 GT for R&D in San Diego ASAP. We will be using the vehicle to help develop new product for this specific application.

We will need the vehicle for 2 weeks as what we are working with is a bit time consuming.

Customers will be accomidated for time that we have the car with free parts once they come out of production.

Best way to get a hold of me is directly at the office either via email or directly by phone

-Brad

800-830-3377 x125

bharvey@jbaheaders.com

I am guessing these will be CARB-legal headers that keep the cats in their stock locations, is that correct?

Sooo tempting...

eventually Yes they will be Carb approved - brand new items are typically Carb pending becuase of the process we go through to get the approval - especially on a new chassis platform

And these are fully tested for heat and clearance issues? I had a set of headers that kept burning through my plug wires...

We take all measures to insure the proper fitment of our products - which is why R&D can sometimes take a bit of time to get done properly - quality assurance is something we are striving to make correct from the get-go to keep the customer service issues to a minimum ....if anyone out there can assist us it will greatly help us with what we are looking to do on these cars

-B
:gears:

We take all measures to insure the proper fitment of our products - which is why R&D can sometimes take a bit of time to get done properly - quality assurance is something we are striving to make correct from the get-go to keep the customer service issues to a minimum ....if anyone out there can assist us it will greatly help us with what we are looking to do on these cars

-B
:gears:

If you were making long tubes, I would seriously consider this, atleast just to help you out. :) The G8 has been parked for a bit, and I'm still up in the air on what turbo system to do.

hey JBA,

did you find a GT for you headers yet?
just curious.

We have not yet - I need one ASAP - if someone out there can help us out it is greatly apprecaited and I will be getting you set up with free parts once they are out of production

I'm tempted. You guys did a great job on my 04 GTO. I really don't think I can go without a car for two weeks. That's a loooong time.

I'm tempted. You guys did a great job on my 04 GTO. I really don't think I can go without a car for two weeks. That's a loooong time.

go for it...

and wont have to spend those couple hundred bucks for headers...

hmm. what exactly do you get for free?

we now have a car in house thanks for the inquires for those of you that contacted me.

we now have a car in house thanks for the inquires for those of you that contacted me.

I dropped my G8 off at JBA last Saturday :driving: hope they get some good results.

looks like we now need a second one of these .....if anyone can help us out we need it in house by next monday and would need it for 2 weeks at most

contact me ASAP if intrested

800-830-3377 x125
bharvey@jbaheaders.com

:driving:

Any updates to this?

Haddad Motorsports brought his G8 to JBA where they did second stage testing. Mike picked up his car this past Friday.

According to JBA, the jigs are built and product should be in production shortly. The CARB legal headers will be 1 3/4" primaries and show a significant gain over stock. I'll let JBA pipe in with the numbers, but the gains (untuned, mind you) will be very impressive.

There will be some excellent offerings from JBA, from long-tube headers, to CARB-legal headers, to full exhaust systems. They should be in production shortly.

Excellent news! Thanks much!

This is good news! The more header options the better. JBA might be a cool cost effective header system.

I'd like to see the horsepower & torque gains that JBA got!



...

So far things are movjing along I have a set of headers I need to test fit on a car ASAP.

If anyone in San Diego / SO Cal can get a car to us this week it would grealty help our efforts.

My contact info is in the post up top.

-b-

I'll see you tomorrow Brad.

Brad,
How are those Headers coming along?

Brad,
How are those Headers coming along?

In stock at haddad motorsports.

http://www.haddadmotorsports.com/catalog/g8-exhaust-c-65_126.html

Steve