Hey, take a look at the CAI I just finished, plus tinted the window. It was a little tough on the intake, very tight and I sitll need to trim a couple of the tube to shorten it up just a little. I'll inclosed the filter which is tucked down in the fender opening. I think you should be able to see that. I just drove it for a short time and didn't get on it to hard. The computer needs to learn a little, so, I'll drive it some more tomorrow. No codes so far and I don't think it will I left the maf and pcv in about the same place. Check out all the pics on cardomain. The tubes look a little smudged, I just polished them and may not have gotten them wiped off good enough.
http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_34_full.jpg
http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_35_full.jpg
http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_36_full.jpg
http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_37_full.jpg
http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_38_full.jpg
http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_39_full.jpg
http://www.cardomain.com/member_pages/show_image.pl?bg=FFFFFF&image=http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_40_full.jpg

Very nice - what are the wheels you've got ? Looks sharp.

http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_34_full.jpg

http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_35_full.jpg

http://memimage.cardomain.net/member_images/1/web/3049000-3049999/3049754_36_full.jpg

could you give us the part numbers you used?

Thanks

Looking very nice there. Good job.

I got the first 90 degree from Spectre to do the mock up. I don't know the part number. I'll will get with Dave from Spectre this week and see when the 90's will be available for sale. The other parts are already available thru their retailers, summit, jegs and oreilly's. I will give you guys full details once I make sure there are no codes that show up and once Dave approves the setup. I'll try to have all the info for ordering by the end of the week or early next weeks. I sounds awsome.

I got the first 90 degree from Spectre to do the mock up. I don't know the part number. I'll will get with Dave from Spectre this week and see when the 90's will be available for sale. The other parts are already available thru their retailers, summit, jegs and oreilly's. I will give you guys full details once I make sure there are no codes that show up and once Dave approves the setup. I'll try to have all the info for ordering by the end of the week or early next weeks. I sounds awsome.

thanks... appreciate it....

you are welcome

oh by the way kinda off the intake subject but did you sand and/or primer the engine cover before you painted it?

thanks

very hot!! like the wheels.

No, you can't sand it, I think you would take the texture off. There is very little paint on the cover. Just use a good cleaner before. Two coats of red and two coats of clear. Paint was about 74 bucks.

looks reall good

Wow! Everything looks great man. :)

Thanks for the nice comments, I had a chance to get on it today, **** it gets it now and really ran good before. So, if you can wait a week or so these should be available for purchase. I want to make sure that anyone can install it.
locrzn

looking tight !!!!