YET ANOTHER CAMARO YOU DO NOT WANT TO MESS WITH EITHER!

I have been very fortunate with the Pedderized Camaros for sure. This one is set up to feed on victims! It will be seen in the SF Peninsula, to San Rafael, to Infineon Raceway, and yes at Infineon Raceway. The SF Bay area is becoming a Pedders stronghold for killer Camaros.

She has been corner balanced, and aggressive alignment, and a lot of meat on the ground and major engine mods are on their way! The setup is between me and the owner. Check her out and be aware!

Now for all you G8 owners, with the exception of the ability to put a larger tire on the Camaro, the G8 base platform will outhandle a Camaro due to the advantages of wheel base. So you can easily make a killer G8 by doing the G8 TrackII kit.


http://forums.peddersusa.com/imagehosting/74bc264992eae8.jpg

http://forums.peddersusa.com/imagehosting/74bc2649a088fb.jpg

http://forums.peddersusa.com/imagehosting/74bc2649a9911b.jpg

Front Pedders Xa strut assembly installed
http://forums.peddersusa.com/imagehosting/74bc2649b2c67a.jpg

Pedders front steering gear bushing installed
http://forums.peddersusa.com/imagehosting/74bc2649c35e29.jpg

Pedders front radius rod bushing and Caster eccentric adjuster
http://forums.peddersusa.com/imagehosting/74bc264eae86aa.jpg

Removing the OE Differential Bushings using the Pedders tool
http://forums.peddersusa.com/imagehosting/74bc264ecab016.jpg


Rear Differential with our Pedders EP1167HD bushings for serious hp and torque!
http://forums.peddersusa.com/imagehosting/74bc264edbb908.jpg

Removing the front OE subframe bushing using Pedders tool. takes 2-3 minutes a bushing. EP1201HD, our most serious rear subframe bushings are installed!
http://forums.peddersusa.com/imagehosting/74bc264eecab8f.jpg

The front subframe bushing removed with the Pedders Tool
http://forums.peddersusa.com/imagehosting/74bc264efd3bd7.jpg

Removing the large rear subframe bushing using our Pedders Tool. Takes 2-3 minutes per bushing
http://forums.peddersusa.com/imagehosting/74bc265249b9e7.jpg

Rear subframe bushing removed using the Pedders Tool
http://forums.peddersusa.com/imagehosting/74bc265259e43b.jpg


Front EP1201HD bushing installed. This is a very serious bushing for very HD driving and torque
http://forums.peddersusa.com/imagehosting/74bc26527bbb8c.jpg

Rear inner toe link bushing with Pedders HD rear eccentric bushing
http://forums.peddersusa.com/imagehosting/74bc26528c727b.jpg

Left rear suspension showing Pedders Xa Coil over, sway bar, adjustable HD end link, rear EP1201HD bushing
http://forums.peddersusa.com/imagehosting/74bc26586c6f56.jpg

Rear suspension showing Pedders inner toe link bushing and custom HD eccentric, inner trailing arm bushing, and front EP1201HD subframe bushing.
http://forums.peddersusa.com/imagehosting/74bc265bf540a9.jpg

Rear suspension showing the Pedders outer trailing arm and toe link bushings at the knuckle
http://forums.peddersusa.com/imagehosting/74bc265c160ae1.jpg

I hope you enjoy these pictures. I tried featuring different aspects of a Pedders Track II kit with each. If you have any questions, just ask.

thanks
mike
dms