BMR Suspension
Delrin Differential Bushings for 2010+ Camaro and Pontiac G8


Eliminate differential movement and maximize driveline response in your high-horsepower 2010+ Camaro and Pontiac G8 with a set of Delrin Differential Bushings from BMR Suspension. These bushings are CNC-machined from Delrin plastic which is known for its high stiffness, low friction and excellent dimensional stability. The two-piece design allows full contact on all 6 thrust surfaces of the subframe mount. The BMR Delrin Differential Bushings (BK026 (http://www.bmrsuspension.com/index.cfm?page=products&vehicleid=17&maincatid=75&catid=216&productid=857)) provide the best control possible making them the ideal choice for all forms of competition.

To preview all of the BMR high-performance suspension parts, please visit www.bmrsuspension.com (http://www.bmrsuspension.com), email sales@bmrfabrication.com, or contact them at BMR Suspension, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

http://www.bmrsuspension.com/siteart/products/BK026_large.jpg

sexy

Is this stiffer than polyurethane bushings? Do they require greasing as well?

Is this stiffer than polyurethane bushings? Do they require greasing as well?
Yeah these are quite a bit stiffer then the poly-urethane bushings since they are made of the solid delrin. Absolutely no greasing is required with these delrin differential mounts.

Is this stiffer than polyurethane bushings? Do they require greasing as well?

Grease is not necessary. This is basically a solid bushing. This would be the equivalent of an aluminum bushing. We use Delrin instead of an aluminum bushing to avoid a galvanic reaction between the steel subframe and aluminum bushing.