A mob in Australia have fabricated a OTRCAI for the V6.

What you guys think?

http://i3.photobucket.com/albums/y71/vpforme/cruise%20pics/DSCF4453.jpg
http://i276.photobucket.com/albums/kk26/Roonstain/otr.jpg
http://i276.photobucket.com/albums/kk26/Roonstain/otr3.jpg

This is a 175kw/235hp V6

http://i276.photobucket.com/albums/kk26/Roonstain/dynographs.jpg

OTRCAI & Tune 21.3kw/28hp increase at the wheels.

Great increase in power! It's now over our HP here in the U.S. I have to believe you could see 280 or so here in the U.S. with all that plus some UD pulley's and exhaust.:)

filter ?

That is a good increase, and it looks great however, with a roto-fab intake and VMS tune you'll get almost 40hp at the wheels. I think i know who im sticking with.

oh yeah, where is that filter?

any idea what the hp gain was with just the cai?

That is a good increase, and it looks great however, with a roto-fab intake and VMS tune you'll get almost 40hp at the wheels. I think i know who im sticking with.

oh yeah, where is that filter?

Yes that's true on a HF V6 you would... This one in particular isn't...

The filter slides on the opening of the CAI. It's a rectangle K&N type...

Not sure if this will work without a tune...

That is a good increase, and it looks great however, with a roto-fab intake and VMS tune you'll get almost 40hp at the wheels. I think i know who im sticking with.

oh yeah, where is that filter?

You do realize this is a V6 car, right?

You do realize this is a V6 car, right?

point taken, are you saying that the hp gains with this setup on the v6 are comparable to the vms/roto-fab setup on the v8?

point taken, are you saying that the hp gains with this setup on the v6 are comparable to the vms/roto-fab setup on the v8?

You said that with "Roto-Fab and VMS you get 40hp, I know who I'm going with". I was just pointing out, this is a 28hp gain in a V6, which is really damn impressive, if you start playing the percentage game.

Something else of interest here, is that a dyno will NEVER give you an accurate number as to what this OTRCAI will do. This is essentially a ramair setup that you cannot mimic in a shop, while on the rollers.

Roto-fab still owns all, in the fit/finish department though.

Another company are also making a CAI for the V6 & V8...

V6
http://www.airhammer.com.au/prodimages/products_v6ahambig.jpg.jpg
http://www.airhammer.com.au/images/hmpg_v6airham.jpg

Got no idea about power figures for the V6; they only have V8 figures...

Now that is a neat looking intake!

WOW! I like that. Now if they can only make one for the V8

WOW! I like that. Now if they can only make one for the V8

They have a air hammer kit for the V8.

http://www.airhammer.com.au/prodimages/products_v8ahambig.jpg.jpg

$385 AUD

What company is making the AirHammer? I found a company that makes them for the HEMI's, but not the G8s

Thanks

Google.com.au "Air Hammer" they are called Velocity...

Thanks. I kept finding a preacher from Tennesse who markets a product with the same name...