Sapper6 Update - Pontiac G8 Forum: G8 Forums - G8Board.com
 
Go Back   Pontiac G8 Forum: G8 Forums - G8Board.com > G8 Community > Lounge

» Auto Insurance
» Vendors
Reply
 
Thread Tools
Old 10-09-2012, 07:12 AM   #1
Sapper6
Junior Member
 
Sapper6's Avatar
 
Join Date: Jan 2012
Posts: 24
Default Sapper6 Update

A few of the guys I met during the short 4 months from purchase of my GXP to my deployment have been asking how I am and what I have been up to. Rather than responding a number of times I thought it best to update in one shot.

I cant wait ti get home and take the car for a good road trip. Mod'ing her will be a certain joy upon return.

I have attached some pictures of myself and some of the boys on my team.



I am in the prone looking for bad guys when my number 2 says smile. I look and say "What!" and this is what I get



My wife says my GXP is safe in the garage. Taken out of shopping runs on occasion to keep her fresh. But I know she is driving around in it so I am looking for it in the hillls at around 11,000 ft. Being a woman she could be anywhere



My fellow long gun, Owen, roughing it with some instant coffee.


Some of our young Joes doing what they do. Great kids, highly motivated and just general good dudes. (Left to right...SPC Richardson, SPC Governale)


This is our Medic( Doc Eickenburg) and my fellow long gun (Owen) making time to go Hollywood.
__________________
#1038 of the 1829

Sapper6 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 10-09-2012, 10:20 AM   #2
BBBBGXP
Senior Member
 
BBBBGXP's Avatar
 
Join Date: Oct 2007
Location: Pacific Northwest, USA
Posts: 2,727
Default

Thank you for your service! Keep your head down over there! Be safe!
BBBBGXP is offline   Reply With Quote
Old 10-09-2012, 10:52 AM   #3
BigZub
Senior Member
 
BigZub's Avatar
 
Join Date: Jul 2009
Location: Pittsburgh, PA
Posts: 657
Default

Thank you for serving!! Much respect to you and your company!!
__________________
'09 Pontiac G8 GXP, A6, Sunroof, MGM, #1664 of 1829
GMM RAMJET OTR CAI, Livernois E/TCM Tune, Kooks 1-7/8" LTs, catted mid-pipe, Hooker Polished SS MaxFlow mufflers - 394RWHP/386RWT
BMR Rear LCA's, stabilizer bars, end links, front LCA bushings, rear toe links and trailing arms, Pedders Street II kit, including subframe and diff bushings.
Hawk Ceramic pads, Brake Performance slotted and dimpled rotors, Russell stainless lines, Super Blue fluid.
Best 1/4 time - 12.52 @ 114.47, 1.94 60ft.
BigZub is offline   Reply With Quote
Old 10-09-2012, 10:59 AM   #4
Widow08
Senior Member
 
Widow08's Avatar
 
Join Date: Apr 2011
Location: N Carolina
Posts: 732
Default

hey man! thanks for the job you do! afgan is so beautiful this time of the year!
__________________
Nick.
2007 Jeep Wrangler Unlimited. Air raid, viper TB, DDM HID, Terra Flex 3" Long arm Lift, Lots of Lights
SOLD PBM 08G8 GT
Widow08 is offline   Reply With Quote
Old 10-09-2012, 01:30 PM   #5
incon3037R
Vtac kicked in yo!!!
 
incon3037R's Avatar
 
Join Date: Jul 2008
Location: Las Vegas
Posts: 708
Default

Stay safe over there. Essayons, Sappers Lead The Way.
__________________

ProCharger F-1D
Treadstone TR1235 FMIC
Kooks 1 7/8 LTH
Corsa catback
New Era (228/240) cam
Yella Terra 1.7 Rockers
GMPP LS3 CNC heads
Aeromotive A1000 fuel pump
FAST fuel rails
FAST FPR
FIC 1000cc injectors
Yank SS2800
Camaro trans pan/filter
Earl's trans cooler
RX catch can

736 RWHP/642 LBFT 91oct 15psi
730 RWHP/621 LBFT E85 13psi
695 RWHP/603 LBFT E85 11psi



incon3037R is offline   Reply With Quote
Old 11-06-2012, 12:57 AM   #6
Sapper6
Junior Member
 
Sapper6's Avatar
 
Join Date: Jan 2012
Posts: 24
Default

Thank you all for your kind words. No thanks needed as it is an honor and privilege to serve.

Sappers lead the way. All the way!!

I look forward to meeting up with some of the NC guys upon my return. And start planning some mods, Oh YA!!
__________________
#1038 of the 1829

Sapper6 is offline   Reply With Quote
Old 11-06-2012, 07:54 AM   #7
Eidolon
Moddin' and Roddin'
 
Eidolon's Avatar
 
Join Date: Jul 2008
Location: Raleigh, NC
Posts: 770
Default

Thanks for serving!

NC? Are you stationed at Bragg?
__________________
2009 Liquid Red O/R M6 G8 GXP "The Yak"

#1468 : 1 of 67 as optioned

Stop, Go, Turn, and Show. I've changed them all on my car, and it's been a labor of love in my garage for almost all of them.

GO WOLFPACK!

Daily Driver: 2013 Oxford White Focus ST (ST3)
Eidolon is offline   Reply With Quote
Old 11-07-2012, 05:33 AM   #8
Sapper6
Junior Member
 
Sapper6's Avatar
 
Join Date: Jan 2012
Posts: 24
Default

Yep, at Bragg.
__________________
#1038 of the 1829

Sapper6 is offline   Reply With Quote
Old 11-07-2012, 01:38 PM   #9
OldSoldier
Senior Member
 
Join Date: May 2009
Location: Grapevine, TX
Posts: 156
Default

Essayons!
__________________
2009.5 SBM GT
Navigation, Backup Camera and HomeLink
13.94 @ 100
OldSoldier is offline   Reply With Quote
Old 11-07-2012, 01:40 PM   #10
Eidolon
Moddin' and Roddin'
 
Eidolon's Avatar
 
Join Date: Jul 2008
Location: Raleigh, NC
Posts: 770
Default

Quote:
Originally Posted by Sapper6 View Post
Yep, at Bragg.
Nice! Dunno if you in the eastern part of the state as well, but I believe there's a monthly get-together in Hope Mills south of Fayettnam. There's also Cars and Coffee in both Raleigh and Charlotte and owners in both areas typically go.
__________________
2009 Liquid Red O/R M6 G8 GXP "The Yak"

#1468 : 1 of 67 as optioned

Stop, Go, Turn, and Show. I've changed them all on my car, and it's been a labor of love in my garage for almost all of them.

GO WOLFPACK!

Daily Driver: 2013 Oxford White Focus ST (ST3)
Eidolon is offline   Reply With Quote
Old 11-07-2012, 01:43 PM   #11
Silver Bullet
Super Moderator
 
Silver Bullet's Avatar
 
Join Date: Apr 2012
Location: Little Rock, AR
Posts: 3,584
Default

Sweet GXP Sapper.....Can't argue with the color choice!...Haha

How extensive is the mod list you have planned?
__________________
-2009.5 MSM Premium GT-

Mods: Brembos, OBX Headers to Maxflows, VCM, RCR Intake, HSRK, LS7 Maf and tuned by Pat G.
In The Garage: Yank 2800 stall, SLP UDP, Pedders Coilovers
10.59 at 100.31 in the 1000.....8.33 at 88.13 in the 1/8....1.99 60 ft

Silver Bullet is offline   Reply With Quote
Old 11-08-2012, 02:51 AM   #12
Sapper6
Junior Member
 
Sapper6's Avatar
 
Join Date: Jan 2012
Posts: 24
Default

I knew about cars and coffee, but not the hope Mills meet. I am just north of Hope Mills. Thanks for the info. I am an old member of a GTP club in Southern CA before I lost her to a dude that ran a red light in Fayettenam. But it’s her demise that got me my GXP, so there is good in all things.

@Silver Bullet - man that’s a hell of a question. I want it all, but I am married so my Commander and Chief keeps me from selling my kids for Mods. I worked my 2000 GTP for 10 years. In the end she had diamond forged pistons, bored to 4.0, heads, custom exhaust, IC, complete handeling revision, lowered and headers..blah, blah. I spent more on mods than I did to buy the car new. But I took my time. I intend to do the same here. Every car I have owned has been super charged, so shall the GXP in time.

I am still very much in the research phase. Gathering info. Right now I am looking at CAI (probably RotoFab), Long headers, exhaust and tune. Drilled and slotted rotors because I like the way they look. I want to lower it but not change the ride to much, probably springs, but we will see. There other details like catch can and other smaller things I am looking in to. The base must be ready for a Magnacharger TVS2300 G8 Supercharger Kit. I would to cam her before the supercharger but I will probably have to buy another cam after the supercharger if I do that. Currently I am looking for around 600HP (With SC) till I figure out the Transmission strength issue. My GTP had a 1000HP rated trans and I look very much for dependability by getting quality parts and moving with precision. The board helps me figure it all out.

And yes the color rocks! We have very good taste. ;-)
__________________
#1038 of the 1829


Last edited by Sapper6; 11-08-2012 at 06:19 AM.
Sapper6 is offline   Reply With Quote
Old 11-08-2012, 08:23 AM   #13
Belo
Senior Member
 
Belo's Avatar
 
Join Date: Dec 2007
Location: Oxford, MS
Posts: 1,711
Default

sapper; what 3 perks do you have equipped and do you mostly play tdm or domination?

jk

stay safe brother!
__________________
Belo is offline   Reply With Quote
Old 11-08-2012, 08:29 AM   #14
Silver Bullet
Super Moderator
 
Silver Bullet's Avatar
 
Join Date: Apr 2012
Location: Little Rock, AR
Posts: 3,584
Default

Quote:
Originally Posted by Sapper6 View Post
I knew about cars and coffee, but not the hope Mills meet. I am just north of Hope Mills. Thanks for the info. I am an old member of a GTP club in Southern CA before I lost her to a dude that ran a red light in Fayettenam. But itís her demise that got me my GXP, so there is good in all things.

@Silver Bullet - man thatís a hell of a question. I want it all, but I am married so my Commander and Chief keeps me from selling my kids for Mods. I worked my 2000 GTP for 10 years. In the end she had diamond forged pistons, bored to 4.0, heads, custom exhaust, IC, complete handeling revision, lowered and headers..blah, blah. I spent more on mods than I did to buy the car new. But I took my time. I intend to do the same here. Every car I have owned has been super charged, so shall the GXP in time.

I am still very much in the research phase. Gathering info. Right now I am looking at CAI (probably RotoFab), Long headers, exhaust and tune. Drilled and slotted rotors because I like the way they look. I want to lower it but not change the ride to much, probably springs, but we will see. There other details like catch can and other smaller things I am looking in to. The base must be ready for a Magnacharger TVS2300 G8 Supercharger Kit. I would to cam her before the supercharger but I will probably have to buy another cam after the supercharger if I do that. Currently I am looking for around 600HP (With SC) till I figure out the Transmission strength issue. My GTP had a 1000HP rated trans and I look very much for dependability by getting quality parts and moving with precision. The board helps me figure it all out.

And yes the color rocks! We have very good taste. ;-)

Im sure you will be researching all your parts extensively and pick the good stuff. Based on what I have heard Century Trans is where to go to get your 6l80 rebuilt to hold good power. They arent cheap though (3000-3500$). Some guys are running 550 to 650 and even more at the wheels with the stock trans and getting away with it but the trans tune has to be right.
__________________
-2009.5 MSM Premium GT-

Mods: Brembos, OBX Headers to Maxflows, VCM, RCR Intake, HSRK, LS7 Maf and tuned by Pat G.
In The Garage: Yank 2800 stall, SLP UDP, Pedders Coilovers
10.59 at 100.31 in the 1000.....8.33 at 88.13 in the 1/8....1.99 60 ft

Silver Bullet is offline   Reply With Quote
Old 11-08-2012, 09:08 AM   #15
Sapper6
Junior Member
 
Sapper6's Avatar
 
Join Date: Jan 2012
Posts: 24
Default

Quote:
Originally Posted by OldSoldier View Post
Essayons!
All The Way Sapper!
__________________
#1038 of the 1829

Sapper6 is offline   Reply With Quote
Old 11-08-2012, 09:12 AM   #16
Sapper6
Junior Member
 
Sapper6's Avatar
 
Join Date: Jan 2012
Posts: 24
Default

Quote:
Originally Posted by Belo View Post
sapper; what 3 perks do you have equipped and do you mostly play tdm or domination?

jk

stay safe brother!

Lets see, Slight of Hand.....oh, hell my perks are my boys. They make it all happen.

You stay safe as well.
__________________
#1038 of the 1829

Sapper6 is offline   Reply With Quote
Old 11-08-2012, 11:17 PM   #17
Silvereagle
Drives with wolves
 
Silvereagle's Avatar
 
Join Date: Jul 2008
Location: Kalispell Montana
Posts: 841
Default

Thanks for your service man, looks like you guys have some nice modified DMR's based upon the M1A platform?
__________________
2009 G8GT - premium and sport package - PSM 1 - of 1063. Magnaflow catback 16887, Rotofab, VVME HID 6k, Cortex Rotofab 91 tuned

Silvereagle is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 06:37 PM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright ©2007-2008, G8Board.com

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.