This twin turbo monster will be the end of me! - Page 3 - Pontiac G8 Forum: G8 Forums - G8Board.com
 
Go Back   Pontiac G8 Forum: G8 Forums - G8Board.com > G8 Tech > Intake/Fuel Tech

Intake/Fuel Tech CAI, TBI, Porting, Forced Induction, Nitrous Oxide...

» Auto Insurance
» Vendors
Reply
 
Thread Tools
Old 11-10-2012, 05:44 AM   #41
SemperFire
Senior Member
 
SemperFire's Avatar
 
Join Date: Aug 2012
Location: Afghanistan--San Angelo TX
Posts: 353
Default

Oh man thats a tuff break glad to hear the engine is not damaged. Nice build you have here!
SemperFire is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-10-2012, 06:19 AM   #42
locrzng888
lsgearhead
 
locrzng888's Avatar
 
Join Date: Mar 2008
Location: clark, mo
Posts: 2,114
Default

That sucks, good luck
__________________
Magnacharged g8gt
Best after Maggie 11.86@ 115.33w/1.74 60ft (best 60ft 1.63) 11/6/10
after maggie 7.58 @ 92.1 w/1.66 60ft
eibach prokit, Ctsv/Camaro Brake Setup
Sport Edition Staggered 20's (sold)
20" Staggered Lorenzo's WL032 (black
20x9.5's and 20x8.5's wrapped with Sumitomo htr 3's
Kook mid tubes w/cats, stock rear
456rwhp 450 rwtq After Cog drive est 500 rwhp
Winner Fastest G8 LSX Challenge 2010 LSX Shootout
I'm a Custom Wheel and Tires Specialist
Painted by Joey Myers
locrzng888 is offline   Reply With Quote
Old 11-20-2012, 11:39 PM   #43
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

Back in business! Rebuilt and ready for the install... Jesse, Charles, and the guys at PureTurbos knocked it out of the park! Bigger and better upgrade (700hp each) with polished compressor housing and ceramic coating turbine housing. Thought I would be out of pocket alot more than what it was!
Attached Images
File Type: jpg 20121120_173028.jpg (134.9 KB, 108 views)
File Type: jpg 20121120_161437.jpg (138.1 KB, 96 views)
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.
adamsar is offline   Reply With Quote
Old 11-21-2012, 12:57 AM   #44
Blanky
Senior Member
 
Blanky's Avatar
 
Join Date: Dec 2010
Location: Ft. lauderdale FL
Posts: 213
Default

I personally need lots of videos of this car. It just sounds like too much magic coming together and I need to see it!
__________________
2009 G8 GT
D1 Procharged
11.69@119
Redline
Blanky is offline   Reply With Quote
Old 11-21-2012, 06:53 AM   #45
Bill in pgh
Senior Member
 
Bill in pgh's Avatar
 
Join Date: Jan 2012
Location: Cabot Pa.
Posts: 268
Default

It's a beautiful thing when your 750 HP GForce axles start to look like your weakest link. I would LOVE to drive your car! But who wouldn't.
__________________
_________________________________________
2009 LR G8 GXP M6 #537 Born on 11/17/2008
2300 Magnuson 3.0 pulley,#60 injectors, KB BAP, 1 7/8 Kooks Mids with high flow cats, into X-Pipe into stock GXP axle back, (mid muffler/Resonator delete), Roto-Fab CAI, McLeod RXT Twin Disc Clutch, GForce axles, Hurst short throw shifter, BMR rear trailer arms. 555 RWHP 505 RWTQ.
Bill in pgh is offline   Reply With Quote
Old 11-21-2012, 10:03 AM   #46
BigV8
Senior Member
 
BigV8's Avatar
 
Join Date: Jan 2009
Location: SC USA
Posts: 1,287
Default

Holy shrapnel batman, that was a close call. Good luck with those badass turbos, I'll be watching for those run times.
__________________
09 GXP SRM A6 w/sunroof. Mods:Livernois Maggie 2.3, 3.0" pulley, 160 stat, KB Bap. Rotofab,Corsa, Kooks 1 7/8 mids, BMR,Pedders supercar coilovers, all Brembos, CTS-V rims, Hids, halos, leather console lid. HSV gauges. 502rwhp,479tq#873 of 1829 and 1 of 169 in SRM.
BigV8 is offline   Reply With Quote
Old 11-21-2012, 10:45 AM   #47
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

Only the install and tune left then I'll post up the dyno and some videos. If only Fontana was still open...
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.
adamsar is offline   Reply With Quote
Old 02-13-2013, 08:02 PM   #48
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

Well been a while, the proess got delayed due to all the craziness getting ready to get commisioned so here are some teaser pics for now!
Attached Images
File Type: jpg 857861_475665742480486_1193003478_o.jpg (137.4 KB, 81 views)
File Type: jpg 860844_475665709147156_1207744568_o.jpg (133.5 KB, 76 views)
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.
adamsar is offline   Reply With Quote
Old 02-13-2013, 08:15 PM   #49
BlackRavenCadi
Junior Member
 
Join Date: Feb 2013
Posts: 7
Default

as someones who sits in the passenger seat of a TT G8 often i gotta say its worth it, farsighted770 whines about working on his car sometimes but he's always smiling when he takes me for a ride in it... and i love it!
__________________
Liz
2004 Cadillac CTS-V - Stock... ish.
BlackRavenCadi is offline   Reply With Quote
Old 02-13-2013, 08:21 PM   #50
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

Liz oh I'm with him there, but as much as I can complain I wouldn't change a thing.
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.
adamsar is offline   Reply With Quote
Old 02-13-2013, 08:27 PM   #51
farsighted770
Senior Member
 
farsighted770's Avatar
 
Join Date: Jun 2012
Posts: 1,078
Default

I'm a lucky guy the girlfriend lets me work on my stuff and knows not to bother me when i'm wrenching, she even hands me tools or gets me drinks when i need...

she wont go into boost though when she drives my car. LOL
__________________
Ron
"As soon as you're born you start dying, so you might as well have a good time" ~ Cake
2009 G8 GT TT

March G8 Of the Month! Thanks so much guys!
farsighted770 is offline   Reply With Quote
Old 02-13-2013, 09:26 PM   #52
Rillo71
There was one?
 
Rillo71's Avatar
 
Join Date: Feb 2010
Location: Orlando, FL
Posts: 2,103
Default

Subscribed.....
__________________
2009 G8 GXP, SRM, M6, Onyx, Roof. (#1818 of 1829) a.k.a Gianna
Show: Tint, VG Sharkfin, 3M clear bra, 6000k HIDs, 20" TSW Interlagos.
Go: BMR, GForce, MGW, Monster Clutch, 3" SOLO, Dynotech, Squash DW255s, Tein, NLP Twin Turbo!
Stock: 363 whp/367 tq SAE (Dyno Jet) 13.149 @ 108.21 mph
Mods (old): 399 /399 SAE (Dyno Jet) 12.711 @ 108.66 1.548 60' w/MT ET Streets
Mods (new): 602/614 SAE 10 psi, 6* (Dyno Jet) 11.33 @ 125.26
Rillo71 is offline   Reply With Quote
Old 02-13-2013, 09:59 PM   #53
TyG8GXP
Senior Member
 
TyG8GXP's Avatar
 
Join Date: Mar 2009
Location: St. Louis
Posts: 3,102
Default

Quote:
Originally Posted by farsighted770 View Post
I'm a lucky guy the girlfriend lets me work on my stuff and knows not to bother me when i'm wrenching, she even hands me tools or gets me drinks when i need...

she wont go into boost though when she drives my car. LOL
Christine is the same way... lol. She gives it enough load to make some whoosh whoosh noises, but it never gets into boost.
__________________
2009 M6 G8 GXP - For Sale
Twin 6265 Precision Turbos, TSP 231/236 cam
ID850s, ZL1 Fuel Pump, KB BAP
Spohn Trailing Arms/Toe Links, BMR Cradle/Diff Bushings
Widened GXP wheels/295 tires, Custom 3" Exhaust
Built by CBI Street Cars, Tuned by Fap Tuning
710rwhp/742rwtq
TyG8GXP is offline   Reply With Quote
Old 02-18-2013, 09:22 PM   #54
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

I wish I had a woman like you guys got... Oh well I'll just have to deal with this boring single college life in San Diego HAHA! Here is the completed look, even blacked out the intercooler, just waiting on the tune and dyno.
Attached Images
File Type: jpg 860671_477627458950981_896345510_o.jpg (96.1 KB, 69 views)
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.

Last edited by adamsar; 02-18-2013 at 09:37 PM.
adamsar is offline   Reply With Quote
Old 02-18-2013, 09:31 PM   #55
SemperFire
Senior Member
 
SemperFire's Avatar
 
Join Date: Aug 2012
Location: Afghanistan--San Angelo TX
Posts: 353
Default

Quote:
Originally Posted by TyG8GXP View Post
Christine is the same way... lol. She gives it enough load to make some whoosh whoosh noises, but it never gets into boost.
Quote:
Originally Posted by farsighted770 View Post
I'm a lucky guy the girlfriend lets me work on my stuff and knows not to bother me when i'm wrenching, she even hands me tools or gets me drinks when i need...

she wont go into boost though when she drives my car. LOL
Opposite for me my wife loves the twins and I had to get her one of her own so she didnt have a reason to drive mine
SemperFire is offline   Reply With Quote
Old 02-18-2013, 09:49 PM   #56
farsighted770
Senior Member
 
farsighted770's Avatar
 
Join Date: Jun 2012
Posts: 1,078
Default

Quote:
Originally Posted by adamsar View Post
I wish I had a woman like you guys got... Oh well I'll just have to deal with this boring single college life in San Diego HAHA! Here is the completed look, even blacked out the intercooler, just waiting on the tune and dyno.
a good chick and you wont miss your college life. truth.

i thought about blacking mine out, you paint or anodize or how'd you do that??? and have you noticed a difference in IAT's after back to back runs since blacking it out?

Quote:
Originally Posted by SemperFire View Post
Opposite for me my wife loves the twins and I had to get her one of her own so she didnt have a reason to drive mine
i like that she doesnt beat on my car... now our V on the other hand thats a whole nother story. LOL
__________________
Ron
"As soon as you're born you start dying, so you might as well have a good time" ~ Cake
2009 G8 GT TT

March G8 Of the Month! Thanks so much guys!
farsighted770 is offline   Reply With Quote
Old 02-18-2013, 09:59 PM   #57
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

I'm pretty much over the college life I came back to finish my degree then go right back into the Navy, but if I do find that woman her ass is mine!

For the intercooler I used Eastwood Radiator Black for just the top and sides avoided the fins for the most part, its real thin so heat gains seem negligible.
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.
adamsar is offline   Reply With Quote
Old 03-01-2013, 01:06 AM   #58
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

99% completed! rearend is in, stripes and front bumper on, just waiting to finish the tune...
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.
adamsar is offline   Reply With Quote
Old 03-10-2013, 07:46 PM   #59
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

had a good weekend, changed the AC tensioner, added deep pan, rewired washer tank, ordered VIM/IMW, Ran some ACES IV through the engine. Tuning happening on Friday!
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.
adamsar is offline   Reply With Quote
Old 05-02-2013, 09:06 PM   #60
adamsar
Senior Member
 
adamsar's Avatar
 
Join Date: Nov 2010
Location: San Diego, CA
Posts: 225
Default

Been a while since I've updated this... Just getting done with the latest tweeks. I'm running 720rwhp/728rwtq @ 14psi on 91 octane on a mustang dyno 85 degrees outside.

Thanks to Greg at CCC motorsports!
__________________
2009 G8 GT Twin Turbo
Forged LS3, 6465 turbos, Tial 38mm waste gates, Tial 50mm blow off valve, full dual 3 stainless exhaust, Eboost2, FMIC, CircleD 6l80e, CircleD 3200 stall converter, Triple staged 392 Walbro pumps, Fuel lab regulator, Aeromotive rails, FIC 127lb injectors, 3.27 rear with Wavetrac diff, Gforce 750hp axles, BMR full bushings kit.

Last edited by adamsar; 05-03-2013 at 12:12 AM.
adamsar is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Tags
build , project , turbo , twin turbo

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 10:53 AM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2007-2008, G8Board.com

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.