Post drag times here - Page 41 - Pontiac G8 Forum: G8 Forums - G8Board.com
 
Go Back   Pontiac G8 Forum: G8 Forums - G8Board.com > Racing > Drag Racing

» Auto Insurance
» Vendors
Closed Thread
 
Thread Tools
Old 12-05-2012, 03:40 PM   #801
bracketracer
Approved Dealer
 
bracketracer's Avatar
 
Join Date: Dec 2007
Location: Dane, WI
Posts: 2,034
Default New PB

bracketracer GXP(M6) 12.526@110.76 1.778 60 ft Byron Dragway 392' DA

I would like to ask if my best stock time can be kept on the list because it continues to be the fastest ET for a stock M6 GXP. I hope that someday soon another stock M6 GXP driver will surpass it, and rival the fastest A6 GXP time!

Thanks!
Attached Images
File Type: jpg photo.JPG (25.9 KB, 16 views)
__________________
Joe Morgan, G8 GXP Registry Organizer, G.O.N.E. Organizer 2010-2013
'93 Sunbird SE 3.1/5-speed 14.869 @ 90.96
2009.5 G8 GXP WH 6M onyx/red no roof 12.921 @ 108.89 BONE STOCK! (then), (now) 12.344 @ 110.92 with 1.688 60' at 766' DA, 2:59 lap time at Road America on RS-As
VCM OTR CAI, HSRK, custom street/dyno tune by oldskoolgp, Monster LT1S (C7 Corvette) Clutch kit, Katech C6 Hvy Dty Master & Slave Cylinders, Kooks LTHs, Solo Hi-Flo Cats & Connector Pipes, Solo Mach Balanced Catback, BMR Toe Rods, Trailing Arms, Cradle & Diff Poly Bushings, DRs
1 of only 10 built in this combo (1 of 4 this combo with RS-As)& #1497 built of the 1829
bracketracer is offline  
Sponsored Links
Advertisement
 
Old 12-06-2012, 05:24 PM   #802
Daniel Linnett
Senior Member
 
Daniel Linnett's Avatar
 
Join Date: Sep 2010
Location: Texarkana
Posts: 1,952
Default

Updated Dec 6th
__________________
For Sale!
416 Iron Stroker 11.3:1, Direct Port Fast 102, Orrsom Intake, TH400 3800 Stall, DSS 9", Whiteline Suspension, 1/4 Record Holder Text for INFO 903-278-9069
Daniel Linnett is offline  
Old 12-07-2012, 05:08 PM   #803
bracketracer
Approved Dealer
 
bracketracer's Avatar
 
Join Date: Dec 2007
Location: Dane, WI
Posts: 2,034
Default

Daniel, do you know why we can only see a partial thumbnail of the list, and not the complete one anymore?
__________________
Joe Morgan, G8 GXP Registry Organizer, G.O.N.E. Organizer 2010-2013
'93 Sunbird SE 3.1/5-speed 14.869 @ 90.96
2009.5 G8 GXP WH 6M onyx/red no roof 12.921 @ 108.89 BONE STOCK! (then), (now) 12.344 @ 110.92 with 1.688 60' at 766' DA, 2:59 lap time at Road America on RS-As
VCM OTR CAI, HSRK, custom street/dyno tune by oldskoolgp, Monster LT1S (C7 Corvette) Clutch kit, Katech C6 Hvy Dty Master & Slave Cylinders, Kooks LTHs, Solo Hi-Flo Cats & Connector Pipes, Solo Mach Balanced Catback, BMR Toe Rods, Trailing Arms, Cradle & Diff Poly Bushings, DRs
1 of only 10 built in this combo (1 of 4 this combo with RS-As)& #1497 built of the 1829
bracketracer is offline  
Old 12-07-2012, 05:12 PM   #804
Daniel Linnett
Senior Member
 
Daniel Linnett's Avatar
 
Join Date: Sep 2010
Location: Texarkana
Posts: 1,952
Default

ill look, no clue. means i did it wrong probably. No one showed me how. Just gave me xls file. then they forums wont let you upload....says file size to big. Pretty annoying. Ill get the hang of it.
__________________
For Sale!
416 Iron Stroker 11.3:1, Direct Port Fast 102, Orrsom Intake, TH400 3800 Stall, DSS 9", Whiteline Suspension, 1/4 Record Holder Text for INFO 903-278-9069
Daniel Linnett is offline  
Old 12-07-2012, 06:37 PM   #805
dctg8
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 543
Default

lol I moved 20 spots! I'm pretty excited about that!!!!
__________________
D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
Old 12-09-2012, 12:33 AM   #806
Rillo71
There was one?
 
Rillo71's Avatar
 
Join Date: Feb 2010
Location: Orlando, FL
Posts: 2,167
Default

New personal best:

Rillo71 M6 GXP 12.711@108.66 mph/1.548 60'/Orlando Speedworld/512 DA/NA
Attached Images
File Type: jpg IMG_20121208_182501.jpg (138.2 KB, 18 views)
__________________
2009 G8 GXP, SRM, M6, Onyx, Roof. (#1818 of 1829) a.k.a Gianna
Show: Tint, VG Sharkfin, 3M clear bra, 6000k HIDs, 20" TSW Interlagos.
Go: BMR, GForce, MGW, Monster Clutch, 3" SOLO, Dynotech, Squash DW255s, Tein, NLP Twin Turbo!
Stock: 363 whp/367 tq SAE (Dyno Jet) 13.149 @ 108.21 mph
Mods (old): 399 /399 SAE (Dyno Jet) 12.711 @ 108.66 1.548 60' w/MT ET Streets
Mods (new): 602/614 SAE 10 psi, 6* (Dyno Jet) 11.33 @ 125.26
Rillo71 is offline  
Old 12-10-2012, 07:23 AM   #807
spartan466
Senior Member
 
spartan466's Avatar
 
Join Date: Jun 2009
Location: Shelby Township, MI
Posts: 143
Default

Quote:
Originally Posted by Rillo71 View Post
New personal best:

Rillo71 M6 GXP 12.711@108.66 mph/1.548 60'/Orlando Speedworld/512 DA/NA
Wow... nice 60'... what's your secret??
__________________
Todd

2009.5 G8 GXP, M6, Liquid Red, Sunroof #1769
Show: CTS-V Wheels, HSV Sliding Console, HSV Triple Gauge Pod with Front Smokers Pack
Go: TVS2300, Kooks 1 7/8 Mids with HFCs, Corsa Cat Back, RotoFab CAI, Livernois Tune, McLeod RXT Twin Disc, gForce 750HP Axles
528 RWHP 498 RWTQ
11.69 @ 123.25 (1.94 60' Spinning)
spartan466 is offline  
Old 12-10-2012, 11:35 AM   #808
Rillo71
There was one?
 
Rillo71's Avatar
 
Join Date: Feb 2010
Location: Orlando, FL
Posts: 2,167
Default

I honestly think it might be a computer error on the part of the track. I actually had two other people verify it as I could not believe it myself the first time I saw it.

My first time ever with drag radials at the track. Frist burnout was not long enough to heat the tires up properly and I posted a 2.02s 60' while launching the car at 2500 rpms. Second time I did a proper burnout, see Wreckwriter's tutorial, and I knew I had the grip. Launched the car at 3000 rpms and dumped the clutch. It hooked, hard, and I posted that time. Tire pressure was at 24psi.

I am guessing that I just hit the right combination for my level of power.
__________________
2009 G8 GXP, SRM, M6, Onyx, Roof. (#1818 of 1829) a.k.a Gianna
Show: Tint, VG Sharkfin, 3M clear bra, 6000k HIDs, 20" TSW Interlagos.
Go: BMR, GForce, MGW, Monster Clutch, 3" SOLO, Dynotech, Squash DW255s, Tein, NLP Twin Turbo!
Stock: 363 whp/367 tq SAE (Dyno Jet) 13.149 @ 108.21 mph
Mods (old): 399 /399 SAE (Dyno Jet) 12.711 @ 108.66 1.548 60' w/MT ET Streets
Mods (new): 602/614 SAE 10 psi, 6* (Dyno Jet) 11.33 @ 125.26

Last edited by Rillo71; 12-10-2012 at 06:05 PM.
Rillo71 is offline  
Old 12-10-2012, 12:05 PM   #809
wreckwriter
9 Second G8
 
wreckwriter's Avatar
 
Join Date: May 2008
Location: West Virginia
Posts: 2,882
Default

Damn fine 60
__________________

2011-13 G8 King
wreckwriter is offline  
Old 12-10-2012, 12:18 PM   #810
Rillo71
There was one?
 
Rillo71's Avatar
 
Join Date: Feb 2010
Location: Orlando, FL
Posts: 2,167
Default

^^Thank you sir!

Now all I need to do is repeat it! The sun shine's on a dog's ass every once in a while.... beginner's luck!
__________________
2009 G8 GXP, SRM, M6, Onyx, Roof. (#1818 of 1829) a.k.a Gianna
Show: Tint, VG Sharkfin, 3M clear bra, 6000k HIDs, 20" TSW Interlagos.
Go: BMR, GForce, MGW, Monster Clutch, 3" SOLO, Dynotech, Squash DW255s, Tein, NLP Twin Turbo!
Stock: 363 whp/367 tq SAE (Dyno Jet) 13.149 @ 108.21 mph
Mods (old): 399 /399 SAE (Dyno Jet) 12.711 @ 108.66 1.548 60' w/MT ET Streets
Mods (new): 602/614 SAE 10 psi, 6* (Dyno Jet) 11.33 @ 125.26
Rillo71 is offline  
Old 12-10-2012, 01:04 PM   #811
wreckwriter
9 Second G8
 
wreckwriter's Avatar
 
Join Date: May 2008
Location: West Virginia
Posts: 2,882
Default

Quote:
Originally Posted by Rillo71 View Post
^^Thank you sir!

Now all I need to do is repeat it! The sun shine's on a dog's ass every once in a while.... beginner's luck!
I'll go with proper procedure over beginners luck. I see a huge percentage of people doing improper burnouts, mostly spinning the tires while in the water.

Consistency is the key on burnouts. Once you have the right procedure try to do everything the same, every time depending on track conditions. Colder track requires longer burnout.

Don't get me wrong, its certainly not easy. My 60s are all over the map like everyone else's
__________________

2011-13 G8 King
wreckwriter is offline  
Old 12-10-2012, 01:09 PM   #812
spartan466
Senior Member
 
spartan466's Avatar
 
Join Date: Jun 2009
Location: Shelby Township, MI
Posts: 143
Default

Quote:
Originally Posted by Rillo71 View Post
I honestly think it might be a computer error on the part of the track. I actually had two other people verifty it as I could not believe it myself the first time I saw it.

My first time ever with drag radials at the track. Frist burnout was not long enough to heat the tires up properly and I posted a 2.02s 60' while launching the car at 2500 rpms. Second time I did a proper burnout, see Wreckwriter's tutorial, and I knew I had the grip. Launched the car at 3000 rpms and dumped the clutch. It hooked, hard, and I posted that time. Tire pressure was at 24psi.

I am guessing that I just hit the right combination for my level of power.
Damn... now I'm thinking that my clutch was definitely slipping last time at the track. It started slipping on the way home, but I couldn't tell if it was slipping during the launch/run or not. Seemed like it was grabbing but maybe not.

I launched at around 3500 RPM and did a very quick slip (closer to a dump), and it hooked hard as well. I only managed a 1.79 60'. Time to get the clutch looked at I guess... at least you let me know it can be done in a 6M... haven't run across a 60' south of a high 1.6 to date (unless I missed a couple). Nice work!
__________________
Todd

2009.5 G8 GXP, M6, Liquid Red, Sunroof #1769
Show: CTS-V Wheels, HSV Sliding Console, HSV Triple Gauge Pod with Front Smokers Pack
Go: TVS2300, Kooks 1 7/8 Mids with HFCs, Corsa Cat Back, RotoFab CAI, Livernois Tune, McLeod RXT Twin Disc, gForce 750HP Axles
528 RWHP 498 RWTQ
11.69 @ 123.25 (1.94 60' Spinning)
spartan466 is offline  
Old 12-10-2012, 02:14 PM   #813
wreckwriter
9 Second G8
 
wreckwriter's Avatar
 
Join Date: May 2008
Location: West Virginia
Posts: 2,882
Default

Quote:
Originally Posted by spartan466 View Post
Damn... now I'm thinking that my clutch was definitely slipping last time at the track. It started slipping on the way home, but I couldn't tell if it was slipping during the launch/run or not. Seemed like it was grabbing but maybe not.

I launched at around 3500 RPM and did a very quick slip (closer to a dump), and it hooked hard as well. I only managed a 1.79 60'. Time to get the clutch looked at I guess... at least you let me know it can be done in a 6M... haven't run across a 60' south of a high 1.6 to date (unless I missed a couple). Nice work!
There's been a few under 1.6:

http://www.g8board.com/forums/showth...hlight=60+foot
__________________

2011-13 G8 King
wreckwriter is offline  
Old 12-10-2012, 04:20 PM   #814
gr8lover
Senior Member
 
Join Date: Jun 2009
Location: SE Michigan
Posts: 1,693
Default

Quote:
Originally Posted by wreckwriter View Post

Tom....

I beleive he was referring to 6 Speed manuals with under 1.6......
__________________
09 Panther Black G8 GT
4L80/Procharged F1d/9"rear/427 lsx; 860rwhp; 798rwtq- **Worlds Heaviest G8--4380 lbs without driver VECTOR tune
(I work for GM-- all statements from me are opinions of my own and does not represent GM in any way.)
gr8lover is offline  
Old 12-10-2012, 04:56 PM   #815
wreckwriter
9 Second G8
 
wreckwriter's Avatar
 
Join Date: May 2008
Location: West Virginia
Posts: 2,882
Default

Quote:
Originally Posted by gr8lover View Post
Tom....

I beleive he was referring to 6 Speed manuals with under 1.6......
<shrug> doesn't specify that.
__________________

2011-13 G8 King
wreckwriter is offline  
Old 12-10-2012, 06:01 PM   #816
LiquidR3D
Senior Member
 
Join Date: Oct 2011
Posts: 669
Default

Quote:
Originally Posted by Rillo71 View Post
I honestly think it might be a computer error on the part of the track. I actually had two other people verifty it as I could not believe it myself the first time I saw it.

My first time ever with drag radials at the track. Frist burnout was not long enough to heat the tires up properly and I posted a 2.02s 60' while launching the car at 2500 rpms. Second time I did a proper burnout, see Wreckwriter's tutorial, and I knew I had the grip. Launched the car at 3000 rpms and dumped the clutch. It hooked, hard, and I posted that time. Tire pressure was at 24psi.

I am guessing that I just hit the right combination for my level of power.
Great 60'!!!! The ET and MPH make me feel damn good about my GT.
__________________
N/A Best Passes
2.014 / 12.666@113.73 - DA +9' 4/19/14
Roto-Fab/LMS Tune/Drag Radials

2.025 / 12.768@110.94 - DA +2,357' 8/9/14
Roto-Fab/LMS Tune/MRT CatBack/Drag Radials


LiquidR3D is offline  
Old 12-11-2012, 12:45 PM   #817
spartan466
Senior Member
 
spartan466's Avatar
 
Join Date: Jun 2009
Location: Shelby Township, MI
Posts: 143
Default

Quote:
Originally Posted by gr8lover View Post
Tom....

I beleive he was referring to 6 Speed manuals with under 1.6......
Yeah... I was talking about a 6M. I'll have to send you a slip for my 60' on the other thread then. I don't want bracketracer to feel lonely being the only 6M to report out.
__________________
Todd

2009.5 G8 GXP, M6, Liquid Red, Sunroof #1769
Show: CTS-V Wheels, HSV Sliding Console, HSV Triple Gauge Pod with Front Smokers Pack
Go: TVS2300, Kooks 1 7/8 Mids with HFCs, Corsa Cat Back, RotoFab CAI, Livernois Tune, McLeod RXT Twin Disc, gForce 750HP Axles
528 RWHP 498 RWTQ
11.69 @ 123.25 (1.94 60' Spinning)
spartan466 is offline  
Old 12-11-2012, 04:07 PM   #818
MGM GT
Senior Member
 
MGM GT's Avatar
 
Join Date: Jun 2009
Location: NoVA
Posts: 2,664
Default

Quote:
Originally Posted by Daniel Linnett View Post
ill look, no clue. means i did it wrong probably. No one showed me how. Just gave me xls file. then they forums wont let you upload....says file size to big. Pretty annoying. Ill get the hang of it.
As I said in the email... I transferred the .xls file to a .jpg to be able to post a pic of the list. You can just copy the cells to paint, crop it, then save as .jpg. I also provided a link so people had a higher res copy then what was uploaded here due to size restrictions.
__________________
Capital City G8 Club /// DriveShaftShop /// Powerhaus Performance
MGM GT is offline  
Old 12-11-2012, 04:43 PM   #819
Daniel Linnett
Senior Member
 
Daniel Linnett's Avatar
 
Join Date: Sep 2010
Location: Texarkana
Posts: 1,952
Default

Quote:
Originally Posted by MGM GT View Post
As I said in the email... I transferred the .xls file to a .jpg to be able to post a pic of the list. You can just copy the cells to paint, crop it, then save as .jpg. I also provided a link so people had a higher res copy then what was uploaded here due to size restrictions.
I am working on the size restrictions. We might get to post in XLS
__________________
For Sale!
416 Iron Stroker 11.3:1, Direct Port Fast 102, Orrsom Intake, TH400 3800 Stall, DSS 9", Whiteline Suspension, 1/4 Record Holder Text for INFO 903-278-9069
Daniel Linnett is offline  
Old 01-06-2013, 06:29 AM   #820
dctg8
Senior Member
 
dctg8's Avatar
 
Join Date: Jan 2011
Location: zebulon nc
Posts: 543
Default




2 NEW PB!!! My lowest et and highest mph!!!

11.45 @ 120.03 w/ 1.62 60ft
11.49 @ 121.52 w/ 1.63 60ft
__________________
D1sc, Meth, Cts-v fuel pump, 223/235 cam, RCR Heads & intake, obx 1 7/8 headers, custom Corsa axle backs, Circle D 2800, 305/35/19 DRs, and more mods that I can't remember.


Dyno #s TBD
D1sc Best 6/6/14 *hot & muggy*
10.63 @ 132 w 1.69 60ft
P1sc Best 11/24/13
10.36 @ 133 w/ 1.51 60ft.
N/A PB 1/05/13
11.45 @ 120 w/ 1.62 60ft.
dctg8 is offline  
Sponsored Links
Advertisement
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 08:35 AM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2007-2008, G8Board.com

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.