Welcome American Racing Headers! - Pontiac G8 Forum: G8 Forums - G8Board.com
 
Go Back   Pontiac G8 Forum: G8 Forums - G8Board.com > Supporting Vendors > American Racing Headers

American Racing Headers American Racing Headers

» Auto Insurance
» Vendors
Reply
 
Thread Tools
Old 02-04-2009, 04:20 PM   #1
Administrator
Administrator
 
Administrator's Avatar
 
Join Date: Jul 2008
Posts: 498
Default Welcome American Racing Headers!

We would like to welcome American Racing Headers as our newest supporting vendor!

Please take a moment to visit their site:

www.americanracingheaders.com
Administrator is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-14-2009, 07:23 PM   #2
raress9596
Junior Member
 
Join Date: Nov 2007
Location: Oceanside Long Island
Posts: 17
Default

Awesome headers. Great guys to deal with. I own a number of vehicles with their headers and they're second to none!
__________________

2009 G8 GT JuniorSS's & 2006 TBSS American Racing Headers, CAI,Tune and SLP dual exhaust.
2007 TBSS mine
2007 Corvette Coupe MN6- L76/L92, cam, American Racing Headers, Kirban shifter, B&B bullet exhaust, A&A Vortech supercharged, 3.91's DTE rear brace, centerforce clutch, Line lock all done by The Vette Doctors.
raress9596 is offline   Reply With Quote
Old 05-10-2009, 12:29 PM   #3
CRL 01 SS
Junior Member
 
CRL 01 SS's Avatar
 
Join Date: Feb 2009
Location: Birmingham, AL
Posts: 33
Default

They make the best headers on the market in my opinion. I have them on my Camaro SS, and it won't be long before I order some for the G8 too.
__________________
2009 Pontiac G8 GT (Traded for Silverado)
2001 Chevrolet Camaro SS (RIP 1/21/2012)
2008 Chevrolet Corvette 2LT Z51
2011 Chevrolet Silverado LTZ Crew Cab Z71
CRL 01 SS is offline   Reply With Quote
Old 06-06-2009, 07:49 AM   #4
phoenixitc
Senior Member
 
Join Date: Mar 2009
Location: Austin, TX area
Posts: 1,141
Default

As I start to lean more towards full headers and pipe back to stock mufflers, I reviewed ARH, Kooks, and SLP. I noticed SLP used 409 SS, you use 304. I'm sure SLP is a good product and so is yours, as well as Kooks.

Based on pricing, do you put yourself in the upper category of price/quality as compared to SLP and its use of 409 SS?
__________________
'09 Silver GT
Mods to date: 93 octane, Rotofab CAI, Holden trunk liner & matching Holden umbrella
Mods short-term: spare tire kit, radiator cover
Mods long-term: exhaust, tune
phoenixitc is offline   Reply With Quote
Old 06-07-2009, 10:24 PM   #5
Tom@ARH
Site Sponsor
 
Tom@ARH's Avatar
 
Join Date: Aug 2008
Posts: 54
Default

409SS even coated rusts very quickly before I was working here I had a set of there F-body headers that rusted through the coating on the primaries where they meet collector in 6 months. I definately put us at the top of the list for quality,fitment and customer service. At this point I believe we are the only company using 100% U.S. made materials including the flanges and collectors and all the clamps so rust will never be an issue. Also everything is made in our shop under our supervision nothing is outsourced and qulitied by someone else. when thers a 2 month wait for something is it because they are'nt making it right now or because the boat has'nt arrived yet.
__________________

Call the shop @
Ph #(631) 608-1986
Amityville,NY
E-Mail: tom@americanracingheaders.com
Tom@ARH is offline   Reply With Quote
Old 06-08-2009, 07:03 AM   #6
phoenixitc
Senior Member
 
Join Date: Mar 2009
Location: Austin, TX area
Posts: 1,141
Default

Thank you. I related this to what I have found with stainless steel grills. I will keep ARH in mind as I get closer to making my decision. Still want to review all headers, now including Doug Thorley.
__________________
'09 Silver GT
Mods to date: 93 octane, Rotofab CAI, Holden trunk liner & matching Holden umbrella
Mods short-term: spare tire kit, radiator cover
Mods long-term: exhaust, tune
phoenixitc is offline   Reply With Quote
Old 07-07-2009, 10:08 PM   #7
spd98
It did hurt a lot!
 
spd98's Avatar
 
Join Date: Feb 2007
Posts: 314
Default

Are you g8 headers full length or shorties?

Btw I had a mishap (got 2 lefts!) with some of thier very first GTO headers. they had me fixed in a day. I understand everyone has thier days but how well they handled the problem showed me how great of a company they are!
spd98 is offline   Reply With Quote
Old 07-09-2009, 09:09 PM   #8
Tom@ARH
Site Sponsor
 
Tom@ARH's Avatar
 
Join Date: Aug 2008
Posts: 54
Default

Our G8 system features long tube headers and exhaust back to the axle. Sorry about your prior mishap
__________________

Call the shop @
Ph #(631) 608-1986
Amityville,NY
E-Mail: tom@americanracingheaders.com
Tom@ARH is offline   Reply With Quote
Old 07-09-2009, 09:43 PM   #9
MANOFSTEEL69
Tigger
 
MANOFSTEEL69's Avatar
 
Join Date: Jun 2008
Location: Whitehouse, Oh
Posts: 502
Default

Quote:
Originally Posted by Tom@ARH View Post
409SS even coated rusts very quickly before I was working here I had a set of there F-body headers that rusted through the coating on the primaries where they meet collector in 6 months. I definately put us at the top of the list for quality,fitment and customer service. At this point I believe we are the only company using 100% U.S. made materials including the flanges and collectors and all the clamps so rust will never be an issue. Also everything is made in our shop under our supervision nothing is outsourced and qulitied by someone else. when thers a 2 month wait for something is it because they are'nt making it right now or because the boat has'nt arrived yet.
I was one of the first to get the ARH's and they still look as good as the day they were put on, other than some bluing at the exhaust manifold.
__________________
IOM, 20% Tint, 19" Zinik Z27 Sofins, American Racing Headers, VARARAM OTR Intake, Powerbond Underdrive Pulley, 160 Deg. Thermostat and a Custom Livernois Motorsports HP Tune ,Mobile 1 M1113 Oil Filter, Royal Purple 5W-30, NEP 228/240 Cam, BMR Trailing Arms. 426 HP and 390 Torque, 1/4 Mile 12.0910 @116.53 MPH Soon: Ported LMS Stage II Heads and Ported Intake, Magnacharger

MANOFSTEEL69 is offline   Reply With Quote
Old 07-10-2009, 09:09 AM   #10
mtolivecracker
Senior Member
 
mtolivecracker's Avatar
 
Join Date: Apr 2008
Location: NJ-Morris
Posts: 640
Default

These headers are sick, really well made, and these guys will take care of you no matter what, even long after youve paid
__________________
2009 Black G8 GXP M6 Red/Onyx
Lots of Mods
mtolivecracker is offline   Reply With Quote
Old 07-12-2009, 07:11 PM   #11
Muff Daddy
Senior Member
 
Join Date: Feb 2007
Location: Edgemont, SD
Posts: 471
Default

where can i get the best deal on a set of arh headers?
__________________

09 White Hot G8 GT **SOLD**
Vararam intake
Custom tune -via HPTuners
Pedders xa's via Wretched Motorsports
605f 607r with 19's
XXR 006 20x8.5 +35 20x10 +38 nitto nt555 245/35/20 275/30/20
Clear side markers and blinkers
RKE fob range extender
Kicker 8in subs in the rear deck using stock amp
2-12in JL W3's powered by JL amp

Awaiting install:
Jettt coolant hoses
Billet Depot catchcan
GXP rear diffuser
Muff Daddy is offline   Reply With Quote
Old 07-12-2009, 07:44 PM   #12
Tom@ARH
Site Sponsor
 
Tom@ARH's Avatar
 
Join Date: Aug 2008
Posts: 54
Default

You can call us in the shop. I'm not sure which of our vendors currently have the lowest price
__________________

Call the shop @
Ph #(631) 608-1986
Amityville,NY
E-Mail: tom@americanracingheaders.com
Tom@ARH is offline   Reply With Quote
Old 07-14-2009, 10:00 AM   #13
cpd004
municipal zoo keeper
 
cpd004's Avatar
 
Join Date: Apr 2008
Location: Chitcago
Posts: 239
Default

Question....what is the recommendation on primary size for say a bolt on car with a tune? Intake, etc...with no internal engine work.
__________________
2009 Stryker GT
2005 Mustang GT
1998 Trans Am
1979 Trans Am
cpd004 is offline   Reply With Quote
Old 07-14-2009, 12:54 PM   #14
BobtheMonkee
Submarine Simeon
 
BobtheMonkee's Avatar
 
Join Date: Oct 2008
Location: Silverdale, WA
Posts: 837
Default

1-3/4" would be best for bolt ons. I went with 1-7/8, but i have a cam and plan on installing a maggie.

Thank you ARH...your system dropped my 1/4 by around .5. my cam was begging for more flow! It was a pleasure being one of your customers!
__________________
2008 C6 4LT Convertible
2006 GMC Yukon Denali
2009 G8 GT (SOLD!)

BobtheMonkee is offline   Reply With Quote
Old 07-14-2009, 03:34 PM   #15
cpd004
municipal zoo keeper
 
cpd004's Avatar
 
Join Date: Apr 2008
Location: Chitcago
Posts: 239
Default

Quote:
Originally Posted by BobtheMonkee View Post
1-3/4" would be best for bolt ons. I went with 1-7/8, but i have a cam and plan on installing a maggie.

Thank you ARH...your system dropped my 1/4 by around .5. my cam was begging for more flow! It was a pleasure being one of your customers!
Why do you say that? Where did you hear that from?

The f body LS crowd with bolt ons typically run 1 7/8. With our more powerful engines, why wouldn't we? What is the downfall?
__________________
2009 Stryker GT
2005 Mustang GT
1998 Trans Am
1979 Trans Am
cpd004 is offline   Reply With Quote
Old 07-14-2009, 04:22 PM   #16
frans96ss
Member
 
Join Date: Aug 2008
Posts: 57
Default

We have built MANY fast cars and we use ARH on all of them. They are BY FAR the best headers on the market. We have them on our 8 second C6Z06
__________________
1996 camaro SS.....700hp N/A 396 LT1, 6 Speed, 9 inch and a bunch of nitrous (in progress)
frans96ss is offline   Reply With Quote
Old 07-14-2009, 04:25 PM   #17
BobtheMonkee
Submarine Simeon
 
BobtheMonkee's Avatar
 
Join Date: Oct 2008
Location: Silverdale, WA
Posts: 837
Default

not sure how much it really matters...its hard to tell you for sure without putting numbers for both sizes and similar mods right next to each other.

however, its usually said that if you are only doing bolt ons, you are good with the 1-3/4"...if you plan on adding a beefy cam and/or FI, then get 1-7/8...i honestly dont know enough yet to tell you any more than that

i guess you could make the arguement that "when in doubt, go bigger".
__________________
2008 C6 4LT Convertible
2006 GMC Yukon Denali
2009 G8 GT (SOLD!)

BobtheMonkee is offline   Reply With Quote
Old 07-14-2009, 04:35 PM   #18
SRG963
Its Good To Be Tha King
 
SRG963's Avatar
 
Join Date: Nov 2007
Location: Charlotte NC
Posts: 8,881
Default

Quote:
Originally Posted by frans96ss View Post
Give me a call.
That C6Z06 is sick!
__________________


Trigger - Fully Loaded 2008 Stealth Blue Pontiac G8 GT

Rotofab/Cortex/BMR/Pedders/VMR/
Adams/OBX/Nitto
PRAISE THE LOWERED



Last edited by Perhaps; 03-29-2011 at 05:08 AM.
SRG963 is offline   Reply With Quote
Old 07-15-2009, 08:04 PM   #19
Tom@ARH
Site Sponsor
 
Tom@ARH's Avatar
 
Join Date: Aug 2008
Posts: 54
Default

We usually recommend 1-3/4 to the mild bolt on guys looking for sound with a little hp gain and 1-7/8 for the guys who mod their cars more. Either choice will be fine you may loose a little bottom end with the 1-7/8. On a 4th Gen F-body we recommend the same thing no need for 1-7/8 on an ls1 till the heads and cam changes start.
__________________

Call the shop @
Ph #(631) 608-1986
Amityville,NY
E-Mail: tom@americanracingheaders.com
Tom@ARH is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 07:29 PM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright 2007-2008, G8Board.com

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.