Had some fun with my new found power - Pontiac G8 Forum: G8 Forums - G8Board.com
 
Go Back   Pontiac G8 Forum: G8 Forums - G8Board.com > Racing > Kill Section

Kill Section “Do unto others as you’d have them do unto you.”

» Auto Insurance
» Vendors
Reply
 
Thread Tools
Old 02-22-2013, 08:19 PM   #1
Ibringtehlzz
Member
 
Ibringtehlzz's Avatar
 
Join Date: Dec 2012
Posts: 73
Default

http://m.youtube.com/watch?v=YKlUHGVp-7s


Went to Mexico for some fun
Mods are pat g tuned
Long tubes
Solo catback
Rotofab cai
Ctsv wheels with 285s out back
The first run we went from 30ish which sucked but its what the lightning owner wanted,he also let out very soon which dint make for a very good video.

I'm also still learning and putting miles on the tcm tune it was all the mods were done the day before

Last edited by Perhaps; 02-27-2013 at 03:49 PM. Reason: Merged.
Ibringtehlzz is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 02-22-2013, 09:21 PM   #2
SRG963
Its Good To Be Tha King
 
SRG963's Avatar
 
Join Date: Nov 2007
Location: Charlotte NC
Posts: 8,810
Default

Nice kill!
__________________


Trigger - Fully Loaded 2008 Stealth Blue Pontiac G8 GT

Rotofab/Cortex/BMR/Pedders/VMR/
Adams/OBX/Nitto
PRAISE THE LOWERED


SRG963 is offline   Reply With Quote
Old 02-22-2013, 09:24 PM   #3
Ibringtehlzz
Member
 
Ibringtehlzz's Avatar
 
Join Date: Dec 2012
Posts: 73
Default

Thank you sir
Ibringtehlzz is offline   Reply With Quote
Old 02-22-2013, 09:26 PM   #4
WiscoG8
Senior Member
 
WiscoG8's Avatar
 
Join Date: Apr 2011
Location: Stevens Point, Wisconsin
Posts: 1,196
Default Re: Had some fun with my new found power

Nice kill. Let out cause he was scurred. Lol. Now you just. Need boost or cam or both

Sent from a nuke plant with my S3
__________________
Rotofab
Kooks LT
Solo HFC
Solo Mach
Pedders Street II GSR kit
Livernois 1C Cam DOD Delete
Milled Heads
Ported Intake
Ported Throttle Body

Bolt ons dyno W/Pat G tune: 364/373
After:430/404
WiscoG8 is online now   Reply With Quote
Old 02-22-2013, 10:05 PM   #5
The Yeti
'Mod'erator
 
The Yeti's Avatar
 
Join Date: May 2009
Location: East Bay, Ca
Posts: 4,383
Default

Nice Kill.
__________________

Pat G Tune & DOD cam, Rick C Intake & TB, 4IN LS7 MAF, Ported stock Heads, Circle D 2600 Stall
VCM CAI, OBX Exhaust, SLP UDP,H&Rs, Koni Shocks
BP catch can, BMR Susp/bush/chasis, Brembo's, Slotted/Drilled Rotors, 3.27 Gears, Zex Wet Shot


Bolt ons Street tires
12.649@107.817 60ft 1.96 Da 700ft

Heads/Cam pre stall Street tires
12.16@114.2 60ft 1.75 Da -200

After Stall
11.82@115.9 60ft 1.66 DA 400ft

Zex 125shot
11.48@124 60ft 1.83 DA 2000ft
second gear pull
The Yeti is offline   Reply With Quote
Old 02-23-2013, 10:46 AM   #6
Ibringtehlzz
Member
 
Ibringtehlzz's Avatar
 
Join Date: Dec 2012
Posts: 73
Default

Quote:
Originally Posted by SRG963 View Post
Nice kill!
Quote:
Originally Posted by WiscoG8 View Post
Nice kill. Let out cause he was scurred. Lol. Now you just. Need boost or cam or both

Sent from a nuke plant with my S3
Quote:
Originally Posted by The Yeti View Post
Nice Kill.
Thanks guys I'm still learning the tune and which gears to run from. Dod delete and heads coming soon
Ibringtehlzz is offline   Reply With Quote
Old 02-25-2013, 03:26 PM   #7
ExpLiciTSainT
Cars are my hobby...
 
ExpLiciTSainT's Avatar
 
Join Date: Sep 2008
Location: Redmond, WA
Posts: 1,597
Default

Nice man, I'm doing the same. I'm trying to figure out how to get out of a dig ... so difficult.
__________________

2008 G8 GT - Procharger 14PSI D1SC, Squash Double Pumper & Fuel Rails, ID725, ZR1 Map, Port & Polished w/ 4 angle heads, Forge 9.5:1, Pacesetters 1 3/4" LTH (CAT-less), Flowmaster Super 44s, X-pipe, Brembos, 3200 FTI Triple Stall, EBC rotors & yellow pads, Motegii MR120 20x9 +38 275/30s wheels, Pedders Coilovers/Swaybars, BMR Strut bar, Pat G cam/tune!

Old: 353.8
New: 632/530 Mustang Dyno
ExpLiciTSainT is offline   Reply With Quote
Old 02-25-2013, 04:06 PM   #8
Ibringtehlzz
Member
 
Ibringtehlzz's Avatar
 
Join Date: Dec 2012
Posts: 73
Default

Quote:
Originally Posted by ExpLiciTSainT View Post
Nice man, I'm doing the same. I'm trying to figure out how to get out of a dig ... so difficult.
I'm sure with the amount of power that you are making it could be a bit tricky lol my ultimate goal for this car is around 450hp
Ibringtehlzz is offline   Reply With Quote
Old 02-25-2013, 06:04 PM   #9
farsighted770
Senior Member
 
farsighted770's Avatar
 
Join Date: Jun 2012
Posts: 1,182
Default

Quote:
Originally Posted by ExpLiciTSainT View Post
Nice man, I'm doing the same. I'm trying to figure out how to get out of a dig ... so difficult.
I've said it before, you just need to man up and invest in tires.
__________________
Ron
"As soon as you're born you start dying, so you might as well have a good time" ~ Cake
2009 G8 GT TT

March G8 Of the Month! Thanks so much guys!
farsighted770 is offline   Reply With Quote
Old 02-25-2013, 06:31 PM   #10
ExpLiciTSainT
Cars are my hobby...
 
ExpLiciTSainT's Avatar
 
Join Date: Sep 2008
Location: Redmond, WA
Posts: 1,597
Default

Quote:
Originally Posted by farsighted770 View Post
I've said it before, you just need to man up and invest in tires.
I have a set of $2800 rcomps going on when WA heats up. But those are road course tires and not drag. No matter what, I'm going to have trouble launching on the street since I will not be swapping on drag radials for the street. Though, I'm sure they are super fun.
__________________

2008 G8 GT - Procharger 14PSI D1SC, Squash Double Pumper & Fuel Rails, ID725, ZR1 Map, Port & Polished w/ 4 angle heads, Forge 9.5:1, Pacesetters 1 3/4" LTH (CAT-less), Flowmaster Super 44s, X-pipe, Brembos, 3200 FTI Triple Stall, EBC rotors & yellow pads, Motegii MR120 20x9 +38 275/30s wheels, Pedders Coilovers/Swaybars, BMR Strut bar, Pat G cam/tune!

Old: 353.8
New: 632/530 Mustang Dyno
ExpLiciTSainT is offline   Reply With Quote
Old 02-25-2013, 06:35 PM   #11
ExpLiciTSainT
Cars are my hobby...
 
ExpLiciTSainT's Avatar
 
Join Date: Sep 2008
Location: Redmond, WA
Posts: 1,597
Default

Quote:
Originally Posted by Ibringtehlzz View Post
I'm sure with the amount of power that you are making it could be a bit tricky lol my ultimate goal for this car is around 450hp
I think 450NA would be super fun and a much safer way to go as well.
__________________

2008 G8 GT - Procharger 14PSI D1SC, Squash Double Pumper & Fuel Rails, ID725, ZR1 Map, Port & Polished w/ 4 angle heads, Forge 9.5:1, Pacesetters 1 3/4" LTH (CAT-less), Flowmaster Super 44s, X-pipe, Brembos, 3200 FTI Triple Stall, EBC rotors & yellow pads, Motegii MR120 20x9 +38 275/30s wheels, Pedders Coilovers/Swaybars, BMR Strut bar, Pat G cam/tune!

Old: 353.8
New: 632/530 Mustang Dyno
ExpLiciTSainT is offline   Reply With Quote
Old 02-25-2013, 08:20 PM   #12
farsighted770
Senior Member
 
farsighted770's Avatar
 
Join Date: Jun 2012
Posts: 1,182
Default

Quote:
Originally Posted by ExpLiciTSainT View Post
I have a set of $2800 rcomps going on when WA heats up. But those are road course tires and not drag. No matter what, I'm going to have trouble launching on the street since I will not be swapping on drag radials for the street. Though, I'm sure they are super fun.
Wus
__________________
Ron
"As soon as you're born you start dying, so you might as well have a good time" ~ Cake
2009 G8 GT TT

March G8 Of the Month! Thanks so much guys!
farsighted770 is offline   Reply With Quote
Old 02-25-2013, 09:44 PM   #13
Rillo71
There was one?
 
Rillo71's Avatar
 
Join Date: Feb 2010
Location: Orlando, FL
Posts: 2,158
Default

Nice kill OP!
__________________
2009 G8 GXP, SRM, M6, Onyx, Roof. (#1818 of 1829) a.k.a Gianna
Show: Tint, VG Sharkfin, 3M clear bra, 6000k HIDs, 20" TSW Interlagos.
Go: BMR, GForce, MGW, Monster Clutch, 3" SOLO, Dynotech, Squash DW255s, Tein, NLP Twin Turbo!
Stock: 363 whp/367 tq SAE (Dyno Jet) 13.149 @ 108.21 mph
Mods (old): 399 /399 SAE (Dyno Jet) 12.711 @ 108.66 1.548 60' w/MT ET Streets
Mods (new): 602/614 SAE 10 psi, 6* (Dyno Jet) 11.33 @ 125.26
Rillo71 is offline   Reply With Quote
Old 02-25-2013, 09:54 PM   #14
ExpLiciTSainT
Cars are my hobby...
 
ExpLiciTSainT's Avatar
 
Join Date: Sep 2008
Location: Redmond, WA
Posts: 1,597
Default

Quote:
Originally Posted by farsighted770 View Post
Wus
lol
__________________

2008 G8 GT - Procharger 14PSI D1SC, Squash Double Pumper & Fuel Rails, ID725, ZR1 Map, Port & Polished w/ 4 angle heads, Forge 9.5:1, Pacesetters 1 3/4" LTH (CAT-less), Flowmaster Super 44s, X-pipe, Brembos, 3200 FTI Triple Stall, EBC rotors & yellow pads, Motegii MR120 20x9 +38 275/30s wheels, Pedders Coilovers/Swaybars, BMR Strut bar, Pat G cam/tune!

Old: 353.8
New: 632/530 Mustang Dyno
ExpLiciTSainT is offline   Reply With Quote
Old 02-25-2013, 09:56 PM   #15
Ibringtehlzz
Member
 
Ibringtehlzz's Avatar
 
Join Date: Dec 2012
Posts: 73
Default

Quote:
Originally Posted by farsighted770 View Post
I've said it before, you just need to man up and invest in tires.
This for sure,some of my favorite videos on YouTube are of Shane's g8 launching on the street,my mind is blown trying to figure out how he has traction even with those big slicks

Quote:
Originally Posted by ExpLiciTSainT View Post
I think 450NA would be super fun and a much safer way to go as well.
I hope so,compared to all of my friends ill still be the slowest so I see no need it trying for much more lol

Quote:
Originally Posted by Rillo71 View Post
Nice kill OP!
Thanks dood!!!
Ibringtehlzz is offline   Reply With Quote
Old 02-27-2013, 02:46 PM   #16
shane
Senior Member
 
Join Date: Mar 2009
Location: STL
Posts: 3,211
Default

Quote:
Originally Posted by Ibringtehlzz View Post
This for sure,some of my favorite videos on YouTube are of Shane's g8 launching on the street,my mind is blown trying to figure out how he has traction even with those big slicks

Once i did the Cam and more boost i never really got traction under 40 even with the slicks. Car worked very well at the 550HP level, not so much the 650-700HP level.
__________________

227/243 .613/.623 114,Ported L92 heads, Procharger D1SC, 3 Row intercooler, Race bypass valve, ID850's,
Alky control meth kit,ZL1 pump,KB BAP, Pacesetter LT's, Full 3" exhaust w/magnaflow race mufflers,Yank3200
Spohn Trailing arms,UMI Adjustable toe links
10.55@134.3 1.60 - SOLD!
2008 C6 A6-Cammed/Stall 10.62@126.7 1.44' SOLD
2010 Denali Sierra AWD 6.2-Bolt ons,Leveled,24's
1980 Malibu-Project
shane is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -5. The time now is 06:28 AM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Copyright ©2007-2008, G8Board.com

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.