lets hear'em...Post Up your Cammed Car Idle Clips - Pontiac G8 Forum: G8 Forums - G8Board.com
Reply
 
LinkBack Thread Tools
post #1 of 59 (permalink) Old 02-20-2013, 04:01 PM Thread Starter
Super Moderator
 
Troy Trackbeast's Avatar
 
Join Date: Oct 2011
Location: Fuquay Varina, NC
Posts: 3,216
Garage
lets hear'em...Post Up your Cammed Car Idle Clips

Also post of cam specs so others will have a reference. Post'em up and Enjoy!

Custom Grind Comp 223/231 .610/617 112+0


Troy Trackbeast is offline  
Sponsored Links
Advertisement
 
post #2 of 59 (permalink) Old 02-20-2013, 04:21 PM
Senior Member
 
DavesWhiteHot's Avatar
 
Join Date: Oct 2009
Location: Birmingham, AL
Posts: 585

New: '12 Mustang GT 5.0 6MT (SR lowering springs, Borla Touring axle back, CAI, Bama tune, 3" O/R H pipe)

***SOLD :"( ***
'09 White Hot G8 GT, Pat G cam (.634"/.608", 223/230, 112 + 2), Pat G tune, HSRK, Rotofab CAI, Magnaflow Catback, DT Tri-Y LT's, Rick Crawford intake, throttle body, and ported/milled heads, stock gears & stock stall, H & R springs, Lovells poly strut mounts, VMR V710 wheels, 11.86 @ 120.32 mph (1.94 60')
DavesWhiteHot is offline  
post #3 of 59 (permalink) Old 02-20-2013, 04:35 PM
GOT VTAK?
 
Rican219's Avatar
 
Join Date: Jul 2008
Location: Cumming GA
Posts: 689
My first Cam Livernoise Stage 1 Cam Spec - 224/230 .581/.590 114 LSA

New Cam Idle 232/240 .630/.630 114 LSA



www.facebook.com/rican219

G8board.com September 2010 and July 2012 G8 of the Month Contest Winner

2008 G8 GT
Vararam, 160 Therm, Kooks 1 7/8 Long Tubes, Solo Performance Mach Shorty Catless, Spartan Performance Custom Cam and Tune, 102 FAST LSXr Intake Mani, Nick Williams 102 TB, Circle D Stall, AI Ported Milled LS3 Heads w/Race Valves, Eibach Springs, KMC775 - 20x10 and 20x8.5, CTS-V Brake Conversion, G8 Murdered Out, Maverick Man Carbon Fiber Hood

A Spartan Performance Creation

Last edited by Rican219; 02-20-2013 at 06:07 PM.
Rican219 is offline  
 
post #4 of 59 (permalink) Old 02-20-2013, 04:51 PM
Senior Member
 
DavesWhiteHot's Avatar
 
Join Date: Oct 2009
Location: Birmingham, AL
Posts: 585
And this is a buddys car that I cammed for him. Livernois Stage 1 cam.


New: '12 Mustang GT 5.0 6MT (SR lowering springs, Borla Touring axle back, CAI, Bama tune, 3" O/R H pipe)

***SOLD :"( ***
'09 White Hot G8 GT, Pat G cam (.634"/.608", 223/230, 112 + 2), Pat G tune, HSRK, Rotofab CAI, Magnaflow Catback, DT Tri-Y LT's, Rick Crawford intake, throttle body, and ported/milled heads, stock gears & stock stall, H & R springs, Lovells poly strut mounts, VMR V710 wheels, 11.86 @ 120.32 mph (1.94 60')
DavesWhiteHot is offline  
post #5 of 59 (permalink) Old 02-20-2013, 05:02 PM
Senior Member
 
blubyya's Avatar
 
Join Date: May 2011
Location: buford, ga
Posts: 320
Re: lets hear'em...Post Up your Cammed Car Idle Clips

]Jose I knew that was gonna pop up in here. Here's my stage 2 livernois before my cam now.


http://youtu.be/zaRmKl3bTj4


.232/.242 .620/600 113 separation

https://www.youtube.com/watch?v=0zR0...e_gdata_player

2008 gt, lsa 9psi, meth, rcr blower cam, Lingenfelter ls3 heads, ls7 maf, crawford tb, kooks headers &mid pipe magnaflow mufflers, spohn toe & lowers
10.38 130mph 1.56 60ft PB
11.29 122pmh 1.67 60ft (old n/a setup)

Last edited by blubyya; 02-20-2013 at 06:06 PM.
blubyya is offline  
post #6 of 59 (permalink) Old 02-20-2013, 05:31 PM
Senior Member
 
MotorCityG8's Avatar
 
Join Date: May 2011
Location: Fraser, MI
Posts: 996
Livernois Stage 1 cam

YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

13' Ford Focus ST2

2008 G8 GT PBM / No Roof - SOLD

Go: Livernois Stage 1 Cam / Circle D 3000 Stall / Ported TB & Intake / Roto-Fab CAI / Pat G Tune / SLP Powerflow Axlebacks / OBX 1 7/8 LT w/3in midpipe / LS7 MAF

Show: Avant Garde M310 / Eibach & Fe3 set up / Plasti Dipped Wheel and Kidney grills / Debadged / Tint (20% windshield, 5% sides, 20% on top of 5% on the rear) / Bathurst Stripes.
MotorCityG8 is offline  
post #7 of 59 (permalink) Old 02-20-2013, 06:56 PM
'Mod'erator
 
The Yeti's Avatar
 
Join Date: May 2009
Location: East Bay, Ca
Posts: 4,887
I'll throw my poor little DOD cam in the ring

Custom Pat G DOD cam...
224/226DOD lobes 226/228non DOD lobes .499/.499 115+4 LSA

Warm idle with good camera
YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


Cold idle with camera phone
YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


LSA, Pat G DOD cam, RCR TB, 4.5IN Intake/MAF,
CNC LS3 Heads, OBX,
H&Rs, Konis, BMR, Brembos, Slotted/Drilled Rotors
3.27 Gears, 2600 Stall, ZL1 pump, Ice tank
Tuned By Pat G and Luis at RPM Speed Center

Bolt ons Street tires
[email protected] 60ft 1.96 Da 700ft

Cam no stall Street tires
[email protected] 60ft 1.75 Da -200

Stall
[email protected] 60ft 1.66 DA 400ft

Zex 125shot
[email protected] 60ft 1.83 DA 2000ft
second gear launch

LSA 1/4???
The Yeti is offline  
post #8 of 59 (permalink) Old 02-20-2013, 07:30 PM
Senior Member
 
iisme13's Avatar
 
Join Date: Aug 2010
Location: DFW
Posts: 562
Re: lets hear'em...Post Up your Cammed Car Idle Clips

My tsp cam
235/239 644\[email protected]
On 404 stroker with ported lsa heads

YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.
]

09 VE SS-V
Performance:
404ci Lunati Crank and Rods, Wiseco Pistons,TSP 235/239,Dallas performance LSA Heads, Yank 3600SS Stall

Appearance: SS-V conversion/ Brembo's/ XXR 522's/tein springs/ HSV gauges

Old Numbers 378hp/365tq
New numbers 501rwhp\467rwtq

Last edited by The Yeti; 02-20-2013 at 10:35 PM. Reason: embedding vid
iisme13 is offline  
post #9 of 59 (permalink) Old 02-20-2013, 08:05 PM
Senior Member
 
TyG8GXP's Avatar
 
Join Date: Mar 2009
Location: St. Louis
Posts: 3,128
TSP 231/236 .644/.613 112LSA



2009 M6 G8 GXP - Sold
710rwhp/742rwtq

Last edited by TyG8GXP; 02-21-2013 at 02:59 PM.
TyG8GXP is offline  
post #10 of 59 (permalink) Old 02-21-2013, 02:38 PM
Cars are my hobby...
 
ExpLiciTSainT's Avatar
 
Join Date: Sep 2008
Location: Redmond, WA
Posts: 1,610
Pat G Cam designed for sustained RPMs near 7K. Fully built 9.5 compression forged engine with a Procharger:



2008 G8 GT - Procharger 14PSI D1SC, Squash Double Pumper & Fuel Rails, ID725, ZR1 Map, Port & Polished w/ 4 angle heads, Forge 9.5:1, Pacesetters 1 3/4" LTH (CAT-less), Flowmaster Super 44s, X-pipe, Brembos, 3200 FTI Triple Stall, EBC rotors & yellow pads, Motegii MR120 20x9 +38 275/30s wheels, Pedders Coilovers/Swaybars, BMR Strut bar, Pat G cam/tune!

Old: 353.8
New: 632/530 Mustang Dyno

Last edited by ExpLiciTSainT; 04-05-2013 at 04:59 PM.
ExpLiciTSainT is offline  
post #11 of 59 (permalink) Old 02-24-2013, 01:59 PM Thread Starter
Super Moderator
 
Troy Trackbeast's Avatar
 
Join Date: Oct 2011
Location: Fuquay Varina, NC
Posts: 3,216
Garage
lets hear'em...Post Up your Cammed Car Idle Clips

Just cleaned it up

YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

Last edited by The Yeti; 02-24-2013 at 05:06 PM.
Troy Trackbeast is offline  
post #12 of 59 (permalink) Old 02-24-2013, 05:07 PM
'Mod'erator
 
The Yeti's Avatar
 
Join Date: May 2009
Location: East Bay, Ca
Posts: 4,887
Sounds damn good Troy.


LSA, Pat G DOD cam, RCR TB, 4.5IN Intake/MAF,
CNC LS3 Heads, OBX,
H&Rs, Konis, BMR, Brembos, Slotted/Drilled Rotors
3.27 Gears, 2600 Stall, ZL1 pump, Ice tank
Tuned By Pat G and Luis at RPM Speed Center

Bolt ons Street tires
[email protected] 60ft 1.96 Da 700ft

Cam no stall Street tires
[email protected] 60ft 1.75 Da -200

Stall
[email protected] 60ft 1.66 DA 400ft

Zex 125shot
[email protected] 60ft 1.83 DA 2000ft
second gear launch

LSA 1/4???
The Yeti is offline  
post #13 of 59 (permalink) Old 03-03-2013, 05:33 PM
Senior Member
 
neverscared's Avatar
 
Join Date: Oct 2009
Location: Minneapolis, MN
Posts: 540
All the mods are in the video description.
YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

2009 G8 GT

Last edited by The Yeti; 03-03-2013 at 06:54 PM. Reason: embedding video
neverscared is offline  
post #14 of 59 (permalink) Old 03-07-2013, 08:02 AM
Member
 
Join Date: Aug 2008
Posts: 49
Love it. With my G8 stored for the winter I love posts like these. I can open more than one clip at a time. So with speakers turned up I click 3 or 4 on and close my eyes. Thanks to all that posted...............Fred
S&W 44 Mag is offline  
post #15 of 59 (permalink) Old 03-12-2013, 09:34 PM
Senior Member
 
gsx_sleeper's Avatar
 
Join Date: Jul 2009
Location: Nashua NH
Posts: 293
Cam specs are in signature


#902 - 11/27/2008
2009 Stryker Blue GXP A6

11.737 @ 118.09 / 1.765 60'

Roto-Fab CAI / Kooks LT Headers & HF Cats / GXP Mufflers / Yank 3200 / P&P Heads /
Comp Cams 231/239 .617/.624 LSA 113.0 / Meth Injection / Dyno Tune
gsx_sleeper is offline  
post #16 of 59 (permalink) Old 03-24-2013, 09:04 AM
Senior Member
 
gardnertroy's Avatar
 
Join Date: Dec 2011
Location: Benton harbor
Posts: 1,359
Garage
Vector 2.5 cam


RCR 223/231 111+0
RCR heads
RCR ported intake/TB
Kooks 1 7/8 LT's.
Kooks x pipe
Magnaflow axle back
Vararam / RCR Ram Plate
Airaid 4" housing/ ls7 Maf
Slp pulley
Fe3/BMR
Yank SS4000
3.45 gear
Drag pack
Crawford tuned

N/A pb
[email protected] 1.48 60ft

Last edited by gardnertroy; 03-24-2013 at 09:07 AM. Reason: spelling
gardnertroy is offline  
post #17 of 59 (permalink) Old 03-24-2013, 11:37 PM
Member
 
409jake's Avatar
 
Join Date: Oct 2010
Location: Pittsburgh, PA
Posts: 91
Livernois Stage 1 - cut outs open...

YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.
409jake is offline  
post #18 of 59 (permalink) Old 03-25-2013, 03:45 PM
Qwk
1 of 927
 
Qwk's Avatar
 
Join Date: Sep 2009
Location: NKY
Posts: 257
Headers & off-road pipes, no mufflers....

https://www.facebook.com/photo.php?v...type=3&theater

https://www.facebook.com/groups/219794194724194/ <~~G8 on Facebook
https://www.g8board.com/forums/showthread.php?t=55309 <~~My build thread.
456RWHP/403RWTQ...Tuned @ CincySpeed= [email protected] on stock 19s!
Qwk is offline  
post #19 of 59 (permalink) Old 03-25-2013, 04:50 PM
Senior Member
 
stangkilr's Avatar
 
Join Date: Nov 2010
Location: Kansas City, MO
Posts: 171
I am so turned on by this thread. I miss my g8 so much. I hate myself for selling it.


2007 C6 M6
2009 G8 GT Sold
stangkilr is offline  
post #20 of 59 (permalink) Old 03-25-2013, 05:37 PM
Senior Member
 
iisme13's Avatar
 
Join Date: Aug 2010
Location: DFW
Posts: 562
Re: lets hear'em...Post Up your Cammed Car Idle Clips

Quote:
Originally Posted by stangkilr View Post
I am so turned on by this thread. I miss my g8 so much. I hate myself for selling it.
Calm down sparky. Put red rocket back in its cage

Sent from AutoGuide.com App

09 VE SS-V
Performance:
404ci Lunati Crank and Rods, Wiseco Pistons,TSP 235/239,Dallas performance LSA Heads, Yank 3600SS Stall

Appearance: SS-V conversion/ Brembo's/ XXR 522's/tein springs/ HSV gauges

Old Numbers 378hp/365tq
New numbers 501rwhp\467rwtq
iisme13 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Pontiac G8 Forum: G8 Forums - G8Board.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome