I've got 6 more sets of these weld-on sway bar adapter brackets being fabricated, for those interested. Can make more if there's enough demand.
Reserve your spot - no deposit required, first come, first served.
Includes 2 lower (larger) clamp bolts. Re-use existing stock clamp bolts in upper position.
NOTE: Welding on-car is required
- brackets overlay the existing rear bar mounts. Limited vertical adjustment for any clearance issues. Brackets are delivered raw, as shown, for best weld penetration - paint & preservation are customer responsibility.
Clamps in photos come with OE 15-17 SS (25mm) wide rear bar kit, not included with bracket package.
Photo #1 & #2 are original prototype brackets. See Photo #5 for final version
Photo #3 shows left side clamp & bar assembled with exhaust system dropped & heat shield removed for installation access
Photo #4 shows exhaust fully assembled & clearance with bar & clamp
Photo #5 is as delivered - top clamp bolt position is slotted to allow customized vertical positioning for any clearance issues with different/larger exhaust, bar clearance, etc., and 2 holes in the clamping surface are for rosette/plug welds to the underlying OE bracket.
$36 plus USPS Priority flat rate small box & 4% for PayPal, total under $45 delivered.
PM or e-mail me if you want to be on the list.
Watch for updates when brackets are ready to ship.