So I’ve found lots of good posts regarding the passenger seat sensor and airbag fault lights on here. I switched my Onyx interior to the red/onyx seats. My original onyx seat passenger sensor has GM #92216444 but I’ve been seeing GM #92225595 listed for this part. Did 92225595 supersede 92216444? Guessing I can use my original one in place of 5595, correct?
I can't find any good information telling me what car(s) originally used that 92216444 P/N. They do show that the 92225595 unit fits all models of the G8 for 08 an 09. They indicate that the 92225595 is for the leather seats an the 92225594 unit was for the cloth seat cars. BUT if also shows that both of those P/'s are good for all of the G8's. The unit you have must have been installed on some of the first cars off the assembly line. IF it has been working correctly I say use it. Especially since the other 2 P/N's go for about $336
I had an airbag fault on my 08' G8 GT leather. Part number on the PPM was 92216444 that was superseded by 92225595. I found a v6 g8 with cloth seats at a junkyard and bought the whole seat for $75. It had a #92219364 (superseded by #92225594) installed and it works with no issues!! Woohoo! So, all 4 modules should work for you. The junkyard is your best bet because the module is already calibrated. Good luck!