Window molding and belt molding black - Pontiac G8 Forum: G8 Forums - G8Board.com
 2Likes
  • 1 Post By PONY MAN
  • 1 Post By ebg8gt
 
LinkBack Thread Tools
post #1 of 9 (permalink) Old 02-03-2019, 04:40 PM Thread Starter
Junior Member
 
DAY42's Avatar
 
Join Date: Jun 2018
Posts: 7
Window molding and belt molding black

I want to purchase the black window molding and belt molding in black. Any website that anyone know that offers this? Even front grills in black or fairly priced that i can paint.
DAY42 is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 02-03-2019, 04:51 PM
Member
 
Funkster's Avatar
 
Join Date: Nov 2018
Posts: 84
JHPSS and a couple other sites carry the black window trim. It costs a pretty penny as a heads up. I believe about $600-700.

As far as the front grilles go, a few different ways can be taken. Painting chrome is usually met with a pretty early failure as the chrome doesn't provide a very good surface for the paint to adhere to. Lots of owners seem to plasti-dip with a few going the vinyl wrap route.
Funkster is offline  
post #3 of 9 (permalink) Old 02-03-2019, 05:21 PM
Senior Member
 
PONY MAN's Avatar
 
Join Date: Mar 2010
Location: EARTH :-/
Posts: 4,358
For the lower belt reveal molding, try gt0g8ta. Might be worthwhile to contact wolfman1192 (forum member) as well. Good luck
wolfman1192 likes this.

#NEVER GIVE UP
#AUDACITY OF HOPE

"Rather not run the risk of offending anyone, so let me just go ahead and offend someone". -PONY MAN

"When you write the story of your life, don't let anyone else hold the pen". -UNKNOWN














PONY MAN is offline  
 
post #4 of 9 (permalink) Old 02-03-2019, 05:25 PM
Senior Member
 
GXPaycheck's Avatar
 
Join Date: May 2008
Location: Clayton, NC (Almost in Raleigh)
Posts: 4,582
PlastiDip works.

2009 G8 GXP, #715 0f 1829 (#18 of 23 as optioned), MSM, 6M, Sunroof, Onyx/Red

2009 G8 GXP, #807 of 1829 (#37 of 68 as optioned), MSM, 6A, Sunroof, Onyx

2016 Chevy SS, Mystic Green, roof, #555 of 2221

Forum junkie at the G8Board and "The G8 Forum That Shall Not Be Named"!
GXPaycheck is offline  
post #5 of 9 (permalink) Old 02-03-2019, 08:24 PM
Senior Member
 
Join Date: Oct 2015
Posts: 174
Ebay for about 145$ shipped.
eqs_g8gt is offline  
post #6 of 9 (permalink) Old 02-03-2019, 08:25 PM
Senior Member
 
ebg8gt's Avatar
 
Join Date: Jan 2017
Location: Mount Airy, MD
Posts: 569
You need @wolfman1192

Great seller. Have a number of things from him.
wolfman1192 likes this.

2009 PBM GT
Under the Knife Again
Wiseco Pistons, K1 Rods, Johnson Lifters, BLP Keep Hatin' PDS Cam, Roto-Fab, BLP Ported Intake and Throttle Body, Kooks 1-7/8 long tubes, XForce Varex Catback, ZL1 Converter, Camaro Trans Pan/Filter, GXP Brembos
Breyton GTS-AV Wheels, 6k HIDs, Holden Steering Wheel and Paddle Shifters, Eibach Springs, 35% Tint
Tuned by Day Tuning
ebg8gt is offline  
post #7 of 9 (permalink) Old 02-04-2019, 06:42 AM
Senior Member
 
Join Date: Mar 2013
Location: New Jersey
Posts: 201
I am all out at the moment but will be getting in upper and lower molding. Lowers are 140 plus shipping, uppers are 350 plus shipping and complete sets are 450. I pay 1/4 shipping on complete sets. Let me know if you are interested.

2009.1 MGM G8 GT-sport/prem/sunroof
Way too many mods to list!!
wolfman1192 is offline  
post #8 of 9 (permalink) Old 02-04-2019, 10:02 AM
Senior Member
 
Belo's Avatar
 
Join Date: Dec 2007
Location: Rochester, NY
Posts: 2,103
i have had good luck with wolfgang exterior trim sealant to get the black back and keep it black if that's all you're looking to do. there's a few other products i could recommend as well if a deep clean is needed first.

2009.5 G8GT Premium OnyxRed Interior
corsa catback, vararam intake, cortex tune
custom audio, sharksfin, HIDs, LED Fogs, 20" MRR GT1's, Kayhan headunit
Belo is offline  
post #9 of 9 (permalink) Old 02-04-2019, 10:24 AM
Senior Member
 
ebg8gt's Avatar
 
Join Date: Jan 2017
Location: Mount Airy, MD
Posts: 569
Quote:
Originally Posted by DAY42 View Post
I want to purchase the black window molding and belt molding in black. Any website that anyone know that offers this? Even front grills in black or fairly priced that i can paint.
For the front grilles, I plasti-dipped mine. I pulled them out of the bumper, took them apart, and applied 3-4 coats. It's been on there close to 10,000 miles, and maybe has 1 rock chip.

2009 PBM GT
Under the Knife Again
Wiseco Pistons, K1 Rods, Johnson Lifters, BLP Keep Hatin' PDS Cam, Roto-Fab, BLP Ported Intake and Throttle Body, Kooks 1-7/8 long tubes, XForce Varex Catback, ZL1 Converter, Camaro Trans Pan/Filter, GXP Brembos
Breyton GTS-AV Wheels, 6k HIDs, Holden Steering Wheel and Paddle Shifters, Eibach Springs, 35% Tint
Tuned by Day Tuning
ebg8gt is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Pontiac G8 Forum: G8 Forums - G8Board.com forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome