Pontiac G8 Forum banner

1 - 4 of 4 Posts

92 Posts
Discussion Starter #1 (Edited)
I will start of by linking the build thread in case anyone is interested. Nothing to hide, so there is some great insight to the build there.

Funkster's 2009.5 G8 GT Build

For the basic rundown:

2009.5 Pontiac G8 GT
Premium Package 19" Wheels
Black & Red Sport Package Interior
74,921 Miles (May go up slightly with nice weather)
Car is in excellent shape never driven in winter and rarely driven in rain.
Clean CarFax
No Sagging Headliner
No Check Engine Lights
No Airbag Lights
No TPMS Lights (I know, is it even a G8 without one?)

All parts except the Roto-Fab have less than 1,000 miles on them.

Engine was rebuilt less than 600 miles ago. The engine needed new cam bearings and I figured it was a good time to just go ahead and have the works done. So engine disassembled, cleaned, decked, etc. Reassembled with ACL bearings and fresh rings. All new GM Gaskets (Pan, Valve cover, Intake, TB, The Works) This was done by a shop local to me with lots of LS experience and I can provide proof of rebuild.

Fresh 6.0L As detailed Above
Factory heads milled .010"
RCR Drag Sportsman Cam
Comp Hex-Adjust Timing Set & Chain
Melling Oil Pump
LS9 Headgaskets
ARP Headstuds
Johson 2110 Lifters
BTR Dual Valvesprings
Manley Pushrods
LS3 Valley Cover
ATI Damper (Pinned with ATI Kit)
A/C Dual Tensioner Upgrade
Roto-Fab Cold Air Intake
Torque Master Engine Mounts

ARH Long Tubes
ARH Catless Mid Section
Stock GT Axlebacks

RCR/Circle D "4DP" Converter (3800ish)
Derale Dual Fan Hypercool Cooler w/-6AN Braided Lines
Camaro Pan (Side tapped for temp sensor)
Camaro Widemouth Filter

HSV Triple Gauge Pod
AEM X-Series AFR Gauge
AEM X-Series Oil Pressure Gauge
AEM X-Series Trans Temp Gauge
HSV Flip Up Cubby
GM Red/Black Leather Shift Knob
Satin Black Trim

Brakes (Parts New in Box, haven't had time to install)
DBA T3 4000 Rotors (Front & Rear)
Hawk HPS Pads (Front & Rear)

Paint Matched Shark Fin Antenna
Sound Dampening Mat throughout trunk
Debadged Rear
Rear Windows Tinted
BMR Steering Rack Bushings

If the buyer wants them the car will also come with a ton of the stock parts. Stock Cam, Converter, Valvetrain, Manifolds and some other things.

I am probably forgetting a few things. If I think of anything else I will update the list.

I am asking $18,500. Please contact me if you'd like any additional pictures or information. Not interested in any trades at this time.


Premium Member
19 Posts
Do you still have the car for sale sounds like I would be interested in it my ph. 828 361 1025 call or text anytime
1 - 4 of 4 Posts