[Titanws6]

The springs that come with the bolts, do these go between each flange?
I though I remembered reading some didn't use them, some did.

Would it go
Bolt-washer-flange-springe-flange-washer-nut ?

 

[SRG963]

I was only able to use them on one side of the flange, as they are too long to fit on both sides.

 

[Titanws6]

Yeah they are some long bolts, thanks for the reply

 

[DancesWithHooks]

Hey man. I've installed 2 sets of these. I didn't use the springs on either set. I did on the first but the mid pipe kept sagging with them in. So, my vote... don't use them. At all! and if you have access to a welder this is your fix for the mid pipe.
http://www.g8board.com/forums/showthread.php?t=69343&highlight=

All the problems I ran into are here and solutions for each (Post #11...)
http://www.g8board.com/forums/showthread.php?t=66482&highlight=

Hope that helps you out!