Pontiac G8 Forum banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
171 Posts
Discussion Starter #1 (Edited)

·
Premium Member
Joined
·
1,471 Posts

·
Registered
Joined
·
81 Posts
If you lower the rear too much you can't get the rear camber back into spec without them or adjustable control arms.
 

·
Registered
Joined
·
171 Posts
Discussion Starter #4
Just curious as to why one would need/want these.
They allow you to align the rear, just like the stock GM bolts but have a little more range.
 

·
Premium Member
Joined
·
1,471 Posts
Thanks for the replies.

I'm lowered in the rear but was able to back into specs. I must not be lowered enough to exceed the factory bolts.

Can the OEM bolts be reused?
 

·
Registered
Joined
·
171 Posts
Discussion Starter #6
Thanks for the replies.

I'm lowered in the rear but was able to back into specs. I must not be lowered enough to exceed the factory bolts.

Can the OEM bolts be reused?
As long as you can attain the correct specs for the rear alignment, you're good to go.
 
  • Like
Reactions: GXP25

·
Registered
Joined
·
171 Posts
Discussion Starter #9
How much are you asking for the 2 sets of cam bolts?
They sold already, hence I changed the title thread from FS to SOLD.
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top